I an thinking about using a left over piece of galvanized sheet metal for a couple tailpieces and the back of a LPG.

But is is new and shiny and I would like old and rusty... any tips on making that happen short of burying it in the back yard for 10 months?

Views: 264

Replies to This Discussion

You could try burning it. Get it deep in the heart of a good old log fire. Blowtorches and heat guns don't work so well.

Or wire brush, lemon juice or some other type of corrosives. Try barbeque brown sauce for discolouration.

Or both.

Try it out on a test piece first.

There are paint alternatives but these have a tendency to scratch or flake.

Excellent! My thanks Bro!

I Recently made some stain using steel wool and vinegar. I also found this solution quickly put a layer of rust on nail heads. Just wiped it on and left it overnight.

Vinegar does nicely. 

Heating/burning Galvanized metal gives off toxic fumes that will make you very sick. If you choose to do this, wear a respirator and have good ventilation. 

Thanx Paul, the same vinegar stain I made for wood worked very well indeed!!

A torch and brushed on ammonia will age steel.

I like 'Acid Magic' for chrome it's not as dangerous as pure hydrocloric acid, might rust steel never tried.

The trick with acid is don't submerge, put your items on a shelf at the bottom of a tupperware container in less than 1/2 inch acid and seal it to let the fumes do the work.

Don't do this inside - beware the fumes can burn your lungs or kill you.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

J. D. Woods replied to J. D. Woods's discussion Are metal frets necessary?
37 minutes ago
Glenn Kaiser commented on Glenn Kaiser's video
Thumbnail

GK less Paul Diddley Bow

"Often quite true Uncle John :) -Glenn"
2 hours ago
Gary O'slide posted videos
3 hours ago
Uncle John commented on Glenn Kaiser's video
Thumbnail

GK less Paul Diddley Bow

"Ha, Ha.  Less is more."
4 hours ago
Uncle John commented on A.D.EKER's video
Thumbnail

Up the Hill A D Eker 2024

"Sounding good, A.D. Great looking git."
4 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Up the Hill A D Eker 2024

"Thanks Keith ! appreciated !"
4 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Up the Hill A D Eker 2024

"Thank you for the comment Doug !appreciated !"
4 hours ago
Keith Rearick liked A.D.EKER's video
5 hours ago
Keith Rearick liked Ghostbuttons's photo
5 hours ago
Keith Rearick liked Randy S. Bretz's photo
5 hours ago
Keith Rearick liked Crazed Fandango's photo
5 hours ago
Keith Rearick liked J. D. Woods's discussion Are metal frets necessary?
5 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->