Thought I might start a discussion around what kind of workspace cbg buffs craft their intruments. For those like myself,who rent in a small unit you couldn't swing a cat in,it can be difficult working without trashing the carpet etc.I'm sure some of you folks have work benches etc to make a newb like me salivate. I'll get the ball rollin and say I did my first build in the bathroom mostly, on top of the washing machine. And a coffee table by the T.V. I throw a big plastic sheet on the carpet under it to catch sawdust etc.Needless to say I have trashed the washing machine lid and top of coffee table.And a few old books to cut on. Come on folks.I am sure someone has a story bout makin a cbg in bed. Or in the Loo he he he

Views: 1845

Reply to This

Replies to This Discussion

@ Darryl. Have to be idiot proof with me usin it he he.

@ Taffy. Would a rubber mallet be any good? This thread is introducing build tips. And thatz AOK with me. Need all the tips I can get.
On a test buld which never saw the light of day coz I muffed it, I tried the bending nails into 'U' shape staples and fitten them into small pre drilled holes along both sides of fretboard. I used a pair of pliers with the jaws padded with some wetsuit rubber and crimped the staples nice and flat with out damageing neck or fretboard. But I drilled a couple holes to close to edge and split fretboard edge. I might revisit that technique again but. Cheers all. Jonno

P.s I posted my build 3 in pic section if anybody interested. It looks ok. The sound is sweet

the wooden mallet was just an alernative for Pavlov a r t,as he has few tools and lacks space,I use a couple of Thor brand hammers,interchangeable heads,you can have varying degrees of hardness plastic type heads,brass heads hide heads and so on

Hi Jonno, as 99% of my fret work is on fingerboards of varying radii I have always used the dead blow hammer shown. When frets are being fitted to a radiused fingerboard they are normally pre [over] radiused so they have a high area in the middle. As the fret is tapped in the high spot goes down and the ends of the fret move out slightly as they go down, this drives the barbs in at a better angle and fit. The dead blow hammer works best to achieve a good fret seating. As mentioned above the rubber hammer eliminates bending, so may not easily make the over radiused fret follow the f/board radius.

However, we are talking slide guitars with a flat narrow fingerboard. I just put in two frets in the board shown, one rubber hammer, one fretting hammer, both worked in this situation fine.

So yes rubber hammer will work.

Cheers Taff

@ Darryl. Wow that hammer is a beaut.

@ Way. Hey man what is that thing called you posted a pic of. Looks nifty.

@ Hi Taffy. I get ya on the radius thingie. Does anyone put the convex curve on a cbg, is that just not worth the trouble. Do you have a machine in your work space that does that? Lovin learning more about all this.
Hi Jonno, the radius on a fingerboard is there to aid better/easier fingering. The CBG's I build are built for slide playing so the bridge saddle is flat, so I make my f/boards flat also. On six stringers CBG's I build that have a radiused (recycled) neck and a flat saddle (for slide) the outside strings are higher off the fingerboard than the middle strings, and for me it creates tuning problems when I use a capo. But that's just me.

I radius my finger boards by hand using a plane and sandpaper on radiused sanding blocks. That's regular guitars not CBG's.
Cheers Taff.

Its not heresy to build a classic neck electric!

re the fretting,many disagree ,but i like curved wire on flat fretboards,if your kerf is correct,the set of the tang of the wire gets a 3 direction grip on the wood and works very well,as Taffy says though some timbers don't grip as well as others,in that case the curved wire can be a bit of a bitch

In my instrument work any task I do has to be reversible, either for me or the next person working on the instrument. To this end to aid in the removal of frets whilst still maintaining a good firm fret/slot fit, I file a very small angle on the top of the fret slot with a small three corner file. I have a special file.

When the fret is pulled out the barbs on the tang do not pull wood fibers/grain up and chip the fingerboard either side of the slot.

I believe that a solid fret job equals a stable neck, necks also contribute to the tone/sustain of the guitar. That's important to me as a CBG builder, because with such a small box/body I want to get as much as I can out of that baby.

Cheers Taff

 

I do most of my work at the kitchen table, which means I often don't have a table to eat at. I don't build a lot, and only have a few hand tools-pocketknife, flush cut saw, miter box, a few rasps and a cordless drill-so this usually isn't a problem.
However, someone recently wrote a little article about me online, and I've gotten a little attention; I currently have eight boxes to build for an event in three weeks. Usually takes me 4-6 evenings to build a guitar.
I have a wife and two kids-5yo & 18months-and my wife is currently pretty unhappy with me.
Lol Way . Good advice he he. Thanx for info bout that clamp gizmo. Looks like the bees knees for a clamp job.

@ Matt. You are in the CBG army now dude. He he he

@Taffy. Thanx for info
Wow radiusing by hand must be intense.

Hmmm. I would dearly love to get away from superglue for fretting. But already I have muffed two pieces of tas oak fretboard tryin out some cut ideas ( plenty of test cuts in a scrap bit too). If I could find a better glue for me split pin fretting I'd use that.I'm startin to get requests for cbg gifts. I don't mind makin em. I just dont like the idea of em being played at a special moment and 1 or more frets fall off. Is there a good glue out there for bonding, that is rock solid and residue is cleaned off good. Mind you, I guess its askin a lot for a very solid bond to slick metal and wood. Cheers all. Jonno

 I have gone through this. I have done creative work of various sorts all my life. My wife doesn't seem to mind me building because it keeps me out of the rv and making messes or spilling something, and yet I am close by to hang out with the dogs. However, I almost got married to another gal, and when I got an exhibition in an art fair for a month I worked until 7 am, woke up at noon, and started again. Then for four days I sat in my booth 12 hours a day. I was close by, but she wasn't happy with me. Now this is a different story, but I have gone through this a lot in my life. Most art forms took me to where I had to work in isolation, such as writing, painting, so I could see how those girls were unhappy, but another story, and they were unhappy with me no matter what. If you are at the kitchen table that means you are home with the family, not elsewhere. Let her complain, don't argue or explain yourself,maybe rub her shoulders a little, and build, build, build, and enjoy the mad creativity that is going to come out of you. It's going to really get those gears going. Congratualtions! 

Wait, to be totally accurate Matt my wife is unhappy with the amount of money I am spending. I am going to have to go out in the streets and play some of my guitars to try to get some cash together to cover some of this. I am not one to try and draw attention to myself, and am sort of dreading it, but at least if I look like a fool I'll be in another town. I am sure you are the type of guy who does a lot for the family. I would just say take a little extra time to do something extra nice for your wife and that part will calm down. I am sure you will sell some. 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
5 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
5 hours ago
BrianQ. commented on Dar Stellabotta's video
9 hours ago
BrianQ. liked Dar Stellabotta's video
9 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
12 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
12 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
13 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
14 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
15 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
15 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
16 hours ago
A.D.EKER commented on Ricky D's photo
16 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->