I have an old acoustic that I want to remove the neck from to use in a build. I've never done this before so if anyone can chime in with hints or what i should look for it would be much appreciated!

Views: 421

Reply to This

Replies to This Discussion

How you approach it depends to a great extent on your desire to save the body. If you don't care about the body, then you can just cut it away.

If you want to "remove" the neck from the body, then you should check YouTube for "Acoustic Guitar Neck Reset".

Removing a glued in neck so that the neck angle can be reset is fairly advanced stuff, buy you should be able to use the same technique to release the glue and remove the neck.

Basically, it involves removing the fret closest to the neck/body joint, then drilling a small hole through the fret board so you can use a small tube/needle to feed moisture (preferably steam into the area of the neck/body joint. The glue is usually a reversible type such as hide glue and the moisture will soften it. Takes some time and patience, but it is doable.

I won't be putting the neck back on that guitar so i might just try cutting it out, but thank you for the informative post I will check out some of those videos aswell!

If you want to use steam that is all you want put in there it's the heat that softens the glue.

I watched a youtube on removing glued on bridges and fingerboards, the lutier masked off the rest with towels and aluminum foil and used a heat lamp to warm up the parts of interest.

You may also want to look through the soundhole to see if the neck is screwed into the neck block with two screws or bolts. If so, your job will be much easier.

I just looked for those now, no such luck, haha.

Hi Tom, here's what I did recently. I had the luxury of a bandsaw to do the job.

Cheers Taff

Nice removal and good use of the heel. It also shows the "V" slot that has to be un-glued to remove the neck from the body. As can be seen, it is not a simple job to get enough moisture into this joint to soften the glue. I guess guitar techs get upwards of $600 for a neck removal and reset. Now I know why.

The hole through the fingerboard and pumping in steam method works if you know where the dovetail joint is. Not all manufactures use the same methods or size of dovetail to fit their necks. I have just removed a Gibson neck and its completely different to the one in that pic. 

Taff

I figured that only high-end guitars that were well documented qualified for such a complex procedure. Point being the shape of the joint on a particular guitar would be know to those qualified to do the work.

You must know a good bit if you removed the neck from a Gibson. How did you proceed with the removal. We all could benefit from the knowledge.

Thanks

Hi, not all completely the case Tom. Some owners guitars mean a lot to them and will pay for high priced repairs on a relatively low priced/old guitar, mainly for sentimental reasons. In these situations one could find a regular dovetail of varying sizes, a plain tenon joint, a tenon joint with dowels down the sides of the  of the glue line as a key, Butt joint with dowels, concealed screws, and even nails added as reinforcement. I believe Stradivari used nails at one time.

Mentioned above was to remove the fret at the body joint 14 fret, the one to remove is the fret that sits over the end of the dovetail. When steaming keep in mind that other areas close by, like sides and neck block, may also be unintentionally loosened.

It's what keeps the job interesting Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

Doug Thorsvik posted a video

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 195th Zoom Mtg 03/25/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG SOF Songbook...
1 hour ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
17 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
17 hours ago
Kent Thurston updated their profile
18 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
19 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
19 hours ago
Poorness Studios liked A.D.EKER's video
21 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
21 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
yesterday
A.D.EKER commented on A.D.EKER's video
yesterday
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
yesterday
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->