Hi everyone,

I recently built my first proper CBG, using a neck-on-top design.  I'm hoping to add a magnetic pickup, and I'll probably either buy a Flatpup (http://www.original-flatpup.com/flatpup-cbg-pickup/86-fp3-scalloped) or build my own (http://onestringmusic.blogspot.com/2013/03/winding-1-string-humbuck...).  My concern is that, even though these pickups are pretty flat, I might still have to cut a small notch in the neck in order to prevent the strings from touching the pickup.  It wouldn't need to be very deep (the production model is advertised as being 4mm thick, and the homemade version doesn't look much thicker), but I'm still a little concerned that cutting a notch might weaken the neck a bit.  The neck is made from 1x2 hardwood (I think it's oak, but I'm not sure).  

What do you guys think?

Views: 365

Reply to This

Replies to This Discussion

I think there's another way. Put the pickup OVER the strings. Take a look at the Lace Alumitone discussion here on CBN. We've managed, with a simple bar magnet, a thickish loop of copper wire, and a specific, quite small transformer, to recreate a quite powerful pickup that can be configured for a variety of situations. This type of pup would prevent the need for cutting into the neck at all.

Oh wow, that's wild!  My knowledge of electronics is pretty limited, but I might be able to figure it out.  At the very least, I could probably figure out a way to suspend a flatpup-type thing above the strings.  It'd be ugly and kludgy, but there's definitely a certain appeal in that.  Thanks!

The designs we've collectively come up with are eminently doable with minimal electronics skill. The beauty of it is, if you use relatively thick copper wire, you can basically bend an L shape to the height you need to get above the strings.

That's quite a design!  Based on this photo, it looks like there's a small cutout that the pickup fits into, and another piece of wood attached to the back of the neck, I'm guessing for reinforcement.  Am I correct about that?

Hey, that sounds great!  I watched your other video as well.  I like how you have two different volume knobs for the two pickups.  

Hey Mark, I read your post earlier today, and followed the link for the diy flat pickup. I was able to make one with stuff I had. The thing works good! I'm going to post a picture. Thanks for putting that link in your post. 

Glad to hear it works well.  It seems remarkably simple.  I tried making one, and it didn't work, but I think I may have used wire that was too thick.  I only got about 200 turns before it got too beefy, and I'm guessing that wasn't enough.  Also, how did you go about mounting it to the guitar?

I forgot to mention that I had proper 42ga wire from StewMac left over from 10 years ago, when I made a few pickups. I just soldered it to a jack and held it next to a git to test it. I think when I mount it, I will cut a whole in the box but won't need to notch the neck. Although, I have the neck braced anyway. The times I thought I didn't need to double the neck inside the box, I regretted it later. They sound funny when the neck isn't strong enough. 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

Doug Thorsvik posted a video

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 195th Zoom Mtg 03/25/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG SOF Songbook...
14 minutes ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
16 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
16 hours ago
Kent Thurston updated their profile
17 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
18 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
18 hours ago
Poorness Studios liked A.D.EKER's video
20 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
20 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
23 hours ago
A.D.EKER commented on A.D.EKER's video
yesterday
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
yesterday
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->