Comment

Comment by BUGGY (C) on June 4, 2016 at 11:41am

As104 needs a pre- amp but there is a similar one that is 1:1000 which apparently is the one to go for... still awaiting mine to try...check its got the 5mm hole not the 9.5mm as they dont work

Comment by BUGGY (C) on June 4, 2016 at 11:34am

Comment by BUGGY (C) on June 4, 2016 at 11:34am

Comment by AGP # on June 3, 2016 at 5:22pm

Sounds good to me 'Buggy', good foot stompin' tune as well!

Comment by Jim Morris on May 31, 2016 at 6:08am

Thanks for the info darryl. This looks like something fun to try even for an electronics ignorant person like myself.

Comment by darryl kernaghan on May 31, 2016 at 5:01am

Jim,that's essentially what it is,but at 1 end the loop goes through an in line current transformer,then to the jack,at this point the AS104 transformer is getting good results,they cost 3 or 4 bucks each

Comment by Jim Morris on May 31, 2016 at 12:49am

I'll have to go look at the blog. Is that simply a magnet with two pieces of aluminum on either side? Do the leads come from each side of the aluminum. I know, I'll have read 200 posts on the blog to get the info.

Comment by Jim Morris on May 31, 2016 at 12:44am

Cool!

Comment by Derek Rose on May 30, 2016 at 3:58pm

Sounds good!

Comment by darryl kernaghan on May 30, 2016 at 2:35pm

sounds great Buggy, you're getting good results,i'm slapping together a biscuit tin guitar to see how it sounds under the tin,i'll let you know

• ‹ Previous
• 1
• 2
• Next ›
• Page