Hi folks, I had an idea the other day and, knowing very little about the electronic side of things so far, I was after an opinion as to whether it would work.
Trying to think of a cool look for self wound 3 or 4 pole pickups, I wondered about having each pole capped with the brass end of a bullet cartridge and have them sunk flush into my cigar box. Basically from the outside it would look like 3 or 4 separate brass disks. I found someone on eBay selling packs of 20 shells for £2.99. My question really is; a) does anyone think it would work? And; b) any suggestions as to how to go about creating one? Would I need to drill out the centre to replace it with the magnet etc. Thanks and please excuse my beginner's ignorance. What is it they say about not running before you can walk?

Views: 384

Replies to This Discussion

These are the ones I was thinking of using
Attachments:

Brass is a tone sucker, at least for alnico magnets. You can either drill holes through them so the magnets are exposed, or try neodymium magnets which are five times stronger than alnico. 

Those look like shotgun shell so the brass part will be over 0.55" or 14mm for the smallest which would be 32 gauge. If they are standard 12 gauge then they would be more like 0.75" or 19mm.

Might be a little to wide. Standard guitar pickups are space about 0.4" apart so you would need to be less than that. 

0.177 cases might be better if you are going to do that.

Thanks guys. I've got some neodymium magnets that I was thinking of using and thanks for the size recommendation. With the U.K. gun laws I could picture in my head the size of want but had no idea what they actually were!

I would just go head and do it.

Why don't you try a normal pickup you make with a thin brass plate over it between the strings just to see how a test would sound

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Swamp Lion Circuit- 3 P90s!

Started by ILL GREEN. Last reply by David Bowes Jul 31, 2022. 2 Replies

No Volume

Started by Steve Bookout. Last reply by BrianQ. Jun 15, 2021. 15 Replies

External Power Adapter- How To

Started by BrianQ.. Last reply by BrianQ. Jun 23, 2020. 3 Replies

Wiring diagrams

Started by David L.. Last reply by Ray Stanis Mar 24, 2020. 10 Replies

Wickedbucker + Piezo +Volume Jack

Started by Adam Jellison. Last reply by Paul Craig Feb 28, 2020. 9 Replies

Psycho knob install

Started by bizzaro guitaro. Last reply by Paul Craig Jan 31, 2020. 16 Replies

Splitting P-Bass pickups?

Started by John Mark Perchalski. Last reply by Paul Craig Jan 30, 2020. 3 Replies

Output method

Started by Holly Hodson. Last reply by KOOL DOG HOOCH Sep 22, 2019. 5 Replies

Creackle from Volume and Tone pots

Started by Arthur Payne. Last reply by KOOL DOG HOOCH Sep 21, 2019. 4 Replies

Dealing with hum...

Started by James Pobog. Last reply by KOOL DOG HOOCH Sep 21, 2019. 6 Replies

Copper foil tape as shield.

Started by Arthur Payne. Last reply by Arthur Payne May 2, 2019. 5 Replies

Why have a switch?

Started by Arthur Payne. Last reply by ILL GREEN Apr 12, 2019. 3 Replies

Problem with second-hand amp.

Started by Arthur Payne. Last reply by Arthur Payne Apr 1, 2019. 5 Replies

Added the CB Gitty “Psycho Knob”

Started by Tim Pannabecker. Last reply by Paul Craig Mar 8, 2019. 16 Replies

Lipstick pickup and Telecaster neck pickup. What goes where?

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Slow Blues Dani & Ol' Grey Bear Mar 1, 2019. 12 Replies

Wiring CB Gitty Black Ice Single Coil

Started by ILL GREEN. Last reply by ILL GREEN Jan 9, 2019. 5 Replies

Minimal effect from volume or tone pot

Started by Arthur Payne. Last reply by Paul Craig Dec 21, 2018. 9 Replies

Problem posting discussion

Started by Arthur Payne. Last reply by Paul Craig Dec 17, 2018. 2 Replies

Vol, tone, 3 way toggle and 2 single coils?

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Paul Craig Nov 24, 2018. 20 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
1 hour ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
1 hour ago
BrianQ. commented on Dar Stellabotta's video
5 hours ago
BrianQ. liked Dar Stellabotta's video
5 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
8 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
8 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
9 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
9 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
11 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
11 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
12 hours ago
A.D.EKER commented on Ricky D's photo
12 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->