Cbgitty economy tuners are always pretty nice. Has anyone here used them on a lap steel and tried turning them sideways? Any advantages or disadvantages to a sideways tuner when it come to a lap steel. My kid asked me about sideways tuners on a lap steel and not having to cut away headstock...instead glue/drill wood and go sideways ?
I didn't know what to say so I'm posting here. Thanks

Views: 474

Reply to This

Replies to This Discussion

That's amazing !!!
Are those regular size tuners? They look great.
How do you widen the bushing on the inside of the hole?? Also are you going through to the other side of the hole where the tuner peg goes in?
Thank you....receiver hole sounds right. I think as easy as this seems... a scrap attempt on my part first.
Very cool! thats a great look there. I'm a little confused there on the diagram as to what the yellow as opposed to green means...is it that the gear needs to face toward the bridge? Sorry if it's totally obvious...
for clarification I meant gear should face towards the nut.technically the gear should always face the nut first then the bridge. Same like like regular mounted gear tuners. I was unclear because your tuner is slightly different type than the economy type ...I'm looking at the pic of your guitar headstock and it shows gear toward nut etc...that what I'm understanding by you diagram...yes?

Some tuners come with the bushings and some not. It would be hard to ream the hole for the bushings, but if you drill the holes tight enough while being loose enough to allow free movement of the peg you won't need the bushings. Example would be a hole that's no more than 1/32nd"/1mm larger than the tuner peg. And lube with petroleum jelly or lithium grease.

Forgot to mention that tuners that have screw in bushings, you have to drill the smaller hole all the way through, then drill the larger hole to the right depth.

I've used them on some pallet wood diddley bows (see my picture page). I drilled the big hole for them using a Forstner bit. The main issue was setting up screws to use as string guides to insure tuning stability and to avoid string buzz.

The guitars with a slanted heastock(3x3) to the right angle won't need string retainers to achieve the right break angle over the nut. But, guitars with lower stepped headstocks(like Fender style) will require retainers for the longer/high strings due to the 6 inline tuner setup loosing break angle on the longer/high strings.

So if you side mount tuners, it's less likely to need string retainers because of greater break angle. Especially if the headstock is stepped or slanted.

The straightest line with the string is the best, not just for tuning up but when played the string encounters friction. Even when tuned, when playing, any abrasion can cause string breakage and or drag when tuning.

 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
9 minutes ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
13 minutes ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
1 hour ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
1 hour ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
3 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
3 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
4 hours ago
A.D.EKER commented on Ricky D's photo
4 hours ago
A.D.EKER commented on A.D.EKER's video
4 hours ago
Keith Rearick liked Doug Thorsvik's video
8 hours ago
Keith Rearick liked A.D.EKER's video
8 hours ago
Keith Rearick liked Doug Thorsvik's video
8 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->