Hi, I have built 4 instruments and used a fret saw from stew mac. My question is: Has anyone used one of these? And How did it work for you? Myself I notice that I do not need a fret hammer to push the frets in and they can be pulled readily out causing me to use super glue. While this is a very accurate cut, it makes me wonder if this is how is it supposed to be. I only push the fret board through and then lift the sled to come back. Any ideas?

Clark

Views: 242

Replies to This Discussion

I use a dovetail saw, which is exactly the same as the one sold by C.B. Gitty, with a miter box. It is perfect for the job, and you do need to tap the frets in with a plastic headed hammer... the frets won't come out.

You need fret wire that has the right tang(width of the part that goes in the slot) measurement for the kerf(thickness) measurement of the blade. The wire tang should be a little larger than the saw's kerf.

I've been using the StewMac fret saw without problems. I agree with Paul; the tang of the fretwire should be the correct size for the thickness of the saw blade.

I used a Xacto saw for Stewmac wire without problems, but the slots weren't quite big enough for the Jesco jumbo wire that CBGitty sells. So you need to match up the wire to the saw. The saw that CBGitty sells will probably work with the Jesco wire, but I haven't checked it out yet.

Have you contacted Stew to get their answer? Are you using their fret wire? Maybe their tang is wider than other fret wire. I find different wood takes fretting better than others. My last wood board was oak and fretted easier than Black Walnut.

One other thing; If the saw blade doesn't stay perfectly perpendicular to the fret board, the slots will end up too wide... Like Al said, a miter box should do the trick.

Thank you all for the input! I use a newer Jet table saw and so that should be accurate. And I ordered the fret wire from Stew Mac when I ordered their saw. I will call Stew Mac and see what is up. 

Clark, Sorry, confusion here, I'm not using the table saw blade, but a japanese hand fret saw of stew mac. I don't have experience with the table saw blade...

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

My 1st CGB

Started by Mi Rankin. Last reply by Ian Jan 16. 2 Replies

Hi, y'all.

Started by HazelFyrebird. Last reply by Ian Nov 14, 2023. 1 Reply

I Am Blaming All of You with YouTube Channels.

Started by William Bannier. Last reply by William Bannier Sep 25, 2023. 3 Replies

New CBG Builder

Started by Jay White Sep 8, 2023. 0 Replies

Ciao from Siena Italy

Started by Filippo Dei. Last reply by Paul Craig May 16, 2023. 3 Replies

New guy… sort of.

Started by William B. Dec 4, 2022. 0 Replies

New kinda Old Boy from Scotland

Started by Lionhound. Last reply by Paul Craig Nov 17, 2022. 1 Reply

I am back from long ago

Started by Jerryrig240. Last reply by Paul Craig Mar 16, 2022. 1 Reply

I am back from long ago

Started by Jerryrig240 Mar 15, 2022. 0 Replies

New guy with muffler guitar build

Started by Jay Cole. Last reply by Tim Pannabecker Jan 5, 2022. 2 Replies

Hello From Idaho

Started by Michael Bowlin. Last reply by Paul Craig Dec 13, 2021. 1 Reply

Eh, From Canada

Started by Kevin Rzewinski. Last reply by Blues Frog Dec 9, 2021. 2 Replies

Looking to make a Uke for my second build

Started by Nathan Christenson. Last reply by the anonymous pick Feb 7, 2021. 6 Replies

Hello from Virginia - N00B to CBG

Started by Bill Saunders. Last reply by Bill Saunders Nov 4, 2020. 2 Replies

First Build (almost) complete

Started by Grizzly Coleman. Last reply by Joe Caruso Aug 25, 2020. 1 Reply

Kiwi Guitarist

Started by Terry. Last reply by Kevin M. Kraft Jun 27, 2020. 10 Replies

The strangest thing happen to me on my birthday

Started by Big D. Last reply by Poorness Studios Mar 1, 2020. 2 Replies

Cigar box mandolin

Started by BeanJean. Last reply by 3 Chord Ziggy Feb 11, 2020. 1 Reply

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
11 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
11 hours ago
Kent Thurston updated their profile
12 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
13 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
13 hours ago
Poorness Studios liked A.D.EKER's video
15 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
15 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
18 hours ago
A.D.EKER commented on A.D.EKER's video
21 hours ago
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
21 hours ago
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->