Replies to This Discussion

Permalink Reply by Carl on December 10, 2015 at 11:13am

At least you remembered to seal the decal before applying it even if you did touch it ;). Have you seen the globby mess you get when you soak the decal in water unsealed DOH! it wasn't a good day that day :P

• ▶ Reply

Permalink Reply by Busyhands Slim on December 30, 2015 at 11:51am

Get a rubber stamp made. Then you can "print" it on the head in any color you can think of (or find paint for). I used gold, in this case, to match the label on the Tabak Especial box.

• ▶ Reply

Permalink Reply by Titch the Clown on December 30, 2015 at 7:33pm

I was going to suggest googling a local custom branding iron maker, most cnc router equipped places can actually do it if you ask nicely.

However I came across this instructable. 

http://www.instructables.com/id/DIY-custom-branding-iron/ 

• ▶ Reply

Permalink Reply by john mackay on December 30, 2015 at 11:23pm

I use these as my logo.wooden button skulls.

Attachments:

• cbg box2.JPG, 1.6 MB
• chris3.JPG, 1.6 MB
• skulls.JPG, 1.6 MB

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page