In my last build I decided to tackle getting a decent height/break angle at the bridge. All my prior builds have been neck-straight-through-with-1/4"-bolt-for-a-bridge. But I am reluctant to cut my necks. Don't ask me why. I don't know.

Instead, I got 1-1/2 degrees by offsetting the neck entry and exit holes. And I got another 1-1/2 degrees by building a tapered thickness fretboard. Now I have 5/8" of string height at the bridge, which is wonderful.

I was worried the neck might end up too thick, but I like the feel of it.

I'd be interested to hear thoughts, particularly of more experienced builders. I couldn't find prior discussions, though I'm sure this isn't the first.

::I added more photos in a blog post here: http://www.cigarboxnation.com/profiles/blogs/building-jaime

Cheers!

Views: 603

Replies to This Discussion

We used to call that a "Witness Stick". A physical tool used to lay out anything that requires Geometry. A common use in days of old was to use a witness stick to lay out stairs. Someone who did not know the math would take a stick of wood, cut to the total height required, to someone who did know the math and they would do the geometry and put marks on the stick for the rise and run of the steps.

I suppose theoretically, a template to lay out the frets is a witness stick. I seldom heard the term used in this manner outside of my own family.

Veering OT but in my former profession of Civil Engineer a cut stick was called a traveller. With a tee piece on top it was used to sight depth of digging for drain trenches etc. Must be something in my blood but I think I will be spending more time designing and building jigs and templates than on the actual guitar build.

We called that TEE structure a 'boning rod' Anthony

Jigs and templates can be as satisfying to build as anything else! I especially like building them for my Table Saw.

Worked out well Rob,but i'd suggest tapering your fret board is over complicating it,raising the tail/lowering the haunch would be simpler.Phrygian kid has a simple graphic where his tapered off cut from the top ,added to the bottom of the neck inside the body simplifies it

As I mentioned, I was inexplicably unexcited about cutting my neck. And though it might seem complicated, it really isn't.

Nonetheless, I'll probably gravitate towards Kid's method at some point

Cheers!

Do you have the Link to that?

I found it here. You'll need to scroll about 2/3 the way down the page: http://www.cigarboxnation.com/forum/topics/through-body-necks-conta...

I also found Bluesheart's pic of this method in practice: http://www.cigarboxnation.com/photo/angleneck2

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
10 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
10 hours ago
Kent Thurston updated their profile
11 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
11 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
11 hours ago
Poorness Studios liked A.D.EKER's video
13 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
14 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
16 hours ago
A.D.EKER commented on A.D.EKER's video
20 hours ago
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
20 hours ago
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->