People often find neat ways or different tools/items to shape the back of the neck.

I start off using a 1/2" roundover bit(3/4" on 6 string guitars) to knock off the edges and get me started. I use a rasp file(flat on one side and half round on the other), utility knife blades as scrapers, sandpaper and a cheap serrated edge steak knife as a scraper(works amazingly well).

What do you use?

Views: 1670

Reply to This

Replies to This Discussion

I have also built 4 concert ukes using laminated 1/4" Douglas Fir.  They work fine, although I would hesitate to make a guitar neck that way.

I bought 2 hand stitched Continental rasp as a treat last year. 14 & 28 tpi. They can shape mega hard quarter sawn oak with ease. They were pretty expensive though!

Harbor Freight or Rockler.
If by 'real' wood rasp you mean one made by hand stitching the tooth pattern and it has a handle

I found relatively inexpensive ones at Lee Valley - StewMac also has some vs $100 plus pro models available online. I found it easier to shape with this than the four in hand - the length and handle make it easier to work with. Hope this helps. I have the Lee Valley version as it was local shopping and I avoided the shipping and exchange buying from StewMac but StewMac seemed just as good.

Thanks for the comment, Joe.

Well, by "real', I guess I mean a rasp that will actually shape hard wood.  A four in hand will take tiny bits of wood off if you have a whole lot of time and patience.  Maybe I am being unfair, because mine is pretty old and very well used.  The wood rasp is another hand tool that has almost disappeared.  I'll have to try to find a Lee Valley.

An interesting thing I learned while researching rasps is that the coarsest ones are for softwoods, but for hardwoods you want to do the rough shaping with a #2 (mine is 14tpi) and fine shaping with a #4 (28tpi). I found the difference between a basic rasp and a quality one to be night and day. I couldn't live without 'em :-)

Thanks for that information, Richey.  It is helpful.

I start with a four-in-hand rasp and get the basic shape. Then trim and final shaping with a hand scraper. Then handsand with 80 grit sand paper to 220 grit sand paper and then 000 steel wool to finish. A typical neck will take me 2 to 4 hours to shape depending on the hardness of the hardwood. Shaping the neck is one of my favourite jobs of building guitars. The shape of the guitar neck is very important to the musician playing the guitar. I don't build my guitar to hang on walls I build guitars that hopefully musicians want to play, that are easy to play, feels comfortable in they hands and of course easy on the ears. Time spent on this task is time well spent.

I use a spokeshave, and I tore up an 80 grit belt from my belt sander.  That one square of sandpaper has not worn out on over a dozen necks...

After that, I work my way to 150 grit...

I had one of those Sureform rasps, it disappeared from my shop. I'll get another one of these days.

Marking lines is always a great idea, especially if there's a trussrod involved.

Never considered ply for a neck, guess it could work if the layers ran vertical to the fretboard. Used pine once and that won't happen again. Even with a trussrod installed, the headstock gives under string pressure. Although the pine in the North and West is probably better than what's available here.

I go with the spokeshave for the main part of the neck. Then files to smooth it out, finish with sandpaper up to 400 grit (I like it smooth). The headstock (and heel if applicable) is always tricky for me. I alternate between my belt sander, round rasps, and drum sander attachment on the hand drill. 

I started out with using a rasp only but I'd always have little humps. The spokeshave gives you a nice even draw along the length of the neck. 

I want to make a curved sanding block for this. Guess I'll start on one after I get the neck the way I want it. Get a profile, draw it on each end of a 2"x 4" and cut out the material with my Router table. Cove bit might work well and finish it off with a curved scraper. That would be very useful for getting a good uniform shape the whole length of the neck. I know that StewMac sells sanding blocks for the fretboard, but I don't know of anyone that sells one for the back of the neck.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

BrianQ. commented on Dar Stellabotta's video
2 hours ago
BrianQ. liked Dar Stellabotta's video
2 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
5 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
5 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
6 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
6 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
8 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
8 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
9 hours ago
A.D.EKER commented on Ricky D's photo
9 hours ago
A.D.EKER commented on A.D.EKER's video
9 hours ago
Keith Rearick liked Doug Thorsvik's video
13 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->