I've seen one or two passing mentions of using bottle caps for volume/tone knobs, but no details. It's not that difficult, so maybe everyone else figures it out just like I did.

But in case you want a head start, here are the specifics:

Materials: a 3/4" wood dowel, a bottle cap, glues (silicone or ceramic, and epoxy)

Dimensions: cut a piece of dowel 3/8" long. Drill a 7/32" hole in the center, all the way through. If possible, use a power saw to keep the sawed surfaces parallel and square to the sides and use a drill press with a vise to get the hole parallel to the dowel. This will make the knob fit straight on the pot shaft and turn concentric with the shaft (no wobbling).

Assembly: glue the dowel to the inside of the bottle cap with silicone caulk, ceramics glue (e.g. Duco) or whatever. With modern bottle caps, there is a plastic seal inside; the dowel will fit just inside the sealing ring, and the glue will only hold it against very light force. The only thing the glue does is hold the dowel in place and keep the epoxy from seeping into the center hole. Mix up about a teaspoon or two of epoxy and push it onto the gap between cap and dowel with a toothpick or coffee stirrer, making sure it's more or less evenly distributed all around. Let it harden overnight.

A 7/32" hole is slightly smaller than a 1/4" pot shaft, so you'll have to carefully squeeze it onto the shaft the first time. The metal of the shaft should press grooves on the inside of the wood, which will make it go on and off easier the next time, but still provide a snug fit with no slippage.

There you go - awesome knobs for about ten cents in wood and epoxy.

Metric users: 3/4" ~ 19mm, 3/8" ~ 9.5mm, 7/32" ~5.5mm, 1/4" = 6.35mm, 1 tsp = 5cc.

Views: 4914

Attachments:

Reply to This

Replies to This Discussion

I use a chunk of wine cork instead of a dowel. 

Simple - once someone explains it.

Thanks for showing your method - probably saved me a couple of days of trial and error (after error, after error).

Very cool ideas!
Thanks for sharing.
I'll have to try out some of these on my next build!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
6 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
6 hours ago
BrianQ. commented on Dar Stellabotta's video
10 hours ago
BrianQ. liked Dar Stellabotta's video
10 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
13 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
13 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
14 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
14 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
16 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
16 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
17 hours ago
A.D.EKER commented on Ricky D's photo
17 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->