Replies to This Discussion

Permalink Reply by Nick on April 12, 2010 at 3:02pm

try a coping saw. basically a cheap, hand powered jig saw.
coping saw in action

Permalink Reply by Alan Roberts on April 12, 2010 at 7:35pm

Nick said:

try a coping saw. basically a cheap, hand powered jig saw.
coping saw in action

Yep. I think I was the only one in my class of 7 that used a band saw. Everyone else used a coping saw. I just got done first.

I did stop one guy from using a rasp. "If you're trying to cut curves, use the spindle sander or disk sander."

Permalink Reply by Jason Nelms on April 13, 2010 at 12:55am

I am just trying to recess the headstock and laminate the piece I cut off to the back of the headstock. I will probably shape it after that.

Alan Roberts said:

Nick said:

try a coping saw. basically a cheap, hand powered jig saw.
coping saw in action

Yep. I think I was the only one in my class of 7 that used a band saw. Everyone else used a coping saw. I just got done first.

I did stop one guy from using a rasp. "If you're trying to cut curves, use the spindle sander or disk sander."

Permalink Reply by Diane in Chicago on April 13, 2010 at 1:12am

I also have no power tools to speak of, so I generally make a dogleg neck. 1/2" stock for the neck, and 1/4" stock for the fingerboard. That same 1/4" stock is used on the back of the head. Of course this does not help you now!

Permalink Reply by Jason Nelms on April 13, 2010 at 6:40am

I guess I could skip the recessing of the neck and put a fretboard on it. I would just have an extremely thick, Les Paul like neck LOL.

Permalink Reply by Jason Nelms on April 15, 2010 at 3:06am

Well, I gapped my 1x2 so, I have gone to your suggestion. What do you use to glue them together? I have heard some folks suggest epoxy while others suggest Tightbond II wood glue.
Diane in Chicago said:

I also have no power tools to speak of, so I generally make a dogleg neck. 1/2" stock for the neck, and 1/4" stock for the fingerboard. That same 1/4" stock is used on the back of the head. Of course this does not help you now!

Permalink Reply by Roger Martin on April 15, 2010 at 4:45am

Diane has a bandsaw (small) if she ever comes to get it LOL
Since its several hundred miles from where she is it's hard for her to use it,