I have an old tambourine I'm using to build a 3 or 4 stringer out of. I would like to install a pickup on it but am afraid to cut a hole in the top. Is this possible? Any
suggestions? I don't want to use a piezo but may have to.

Views: 882

Attachments:

Reply to This

Replies to This Discussion

Stick an electric guitar string on the underside of the skin then a magnetic pickup under that.  Don't cut the skin.  It'll work.

Whoah!!!!

Where'd you pick up that little gem??
As far as I knew only old Lowe, Jim & I shared that little 'state secret'

Great stuff, yep do that

Ps only needs to be a tiny clipping off a string ;)

Oops.  I remember a similar, open discussion in the FB Group where I suggested a small light piece of steel or iron wire on the underside of a wood box or skin when someone didn't want to cut the surface.  Pretty sure it was a box.  And an Aussie named Jef mentioned a guitar string as fitting the trick.

I have used the iron wire since I got a spool of it around and I like the way it works.  It also surprises me how very little movement is needed to produce a clean tone from a mag pup.  We see the huge vibration from the strings on a typical electric guitar and think it must be necessary in order to get any sound.  But I built a tin banjo with the bridge sandwiching the lid and the pup together firmly.  Still get good volume and almost no feedback unless the gain is way too high.  Point is that it doesn't take a lot to distort the magnetic field enough for the pup to work well.

Nice tip!

As a side note, I have also seen a banjo with a single coil from a strat under the head.

It can be seen in this video (she is also a very interesting performer) https://www.youtube.com/watch?v=1NhsVwWQp2M

I don't see why you'd bother remembering that 'awesome' trick when you are already so convinced that the 'true' sound (to just about any soundboard) is in a $2 radio shack buzzer. I think you ought go into mass manufacturing immediately before you enlighten too many potential competitors with your incredible insight :)


To the original poster, Seth...
Why Eric's answer is special.. (And since we're talking about the 'true' sound of the hide)
A tiny clipping of guitar string epoxied on the inside is not going to move like a heavily tensioned length of guitar string that is shortened to an arbitrary length to achieve some desired pitch. It's going to move like a tiny bit of steel which adds almost no mass to a tensioned bit of animal hide with a wooden structure bearing load onto it from some tensioned strings. Think about it ;)
B,b,but won't the mass of the mag pup magnetically stuck to the epoxied string clipping on the underside of the stretched animal hide alter the resonance of the stretched animal hide, thus altering its "true" sound (which is likely to be twangy no matter what you do to it)? ;-) Or does it matter where you epoxy the string on the underside (closer to the neck for warmer tones, closer to the bridge for brighter tones...all of which will still be "banjoey")?

I find it interesting that people wanna add pups of any type to banjos. I always find them pretty loud and twangy, able to cut through the mix, even in bars with lots of noise. Did I mention they always sound loud and twangy? Must be that stretched animal hide acting like a resonator.

Still, it's definitely a neat little trick, worth remembering. For what it's worth (free, actually), I am in the process of receiving an old banjo in its constituent parts; I wonder if it will still sound like a banjo?

I kind of agree with Oily here on not adding a pickup, but I'm kind of a banjo traditionalist myself.  I bet it will be loud enough to keep up with a couple acoustic guitars.

I'm a big fan of piezos for CBGs and can coax some "natural" acoustic tone out of the right box, but I haven't had the same luck with skin heads.  I've built two, and they both sounded pretty crappy even with a lot of dampening of the piezo.  The tight skin is pretty unforgiving when it comes to handling noise. 

This mag pup trick is very intriguing though.  Anybody got some sound samples of this in action?

Very funny image of you trying to attach a piezo to a skinhead just flitted through my brain. I think you might get yer ass kicked...

And do I have the scars to prove it.  The ironic thing is that skinheads are usually amped up.

The image of a skinhead jacked into a Fender Twin is not working for me...especially with a banjo. All I'm seeing now is this:

http://www.arrghpaine.com/wp-content/uploads/2012/08/dueling_banjos...

Oh, the new Volksboxes are out!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
30 minutes ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
43 minutes ago
BrianQ. commented on Dar Stellabotta's video
5 hours ago
BrianQ. liked Dar Stellabotta's video
5 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
7 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
7 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
9 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
9 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
10 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
11 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
11 hours ago
A.D.EKER commented on Ricky D's photo
11 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->