Hi all,  I just recently joined the Cigar Box Nation!  I happened upon this site while building my first cigar box guitar.  I have learned a lot from all of you in regards to building these awesome guitars. Although, I had some trouble figuring out how to make a scarf joint without a table saw, so I came up with this idea.  I noticed there is a lot of discussion about how to make the joint and I wanted to share this easy trick with all of you.

1. take a 3/4" pine board about 12" long and cut one end at 15 degrees with miter saw.

2. attach a strip of wood to the back side of cut piece of wood to clamp to the saw.

3. attach another small strip along the angle you just cut to help "rest" your neck material against.

4. cut a headstock peice about 6 inches or so.

5. set saw to 0 degrees with jig attached to miter saw.

6. cut the 15 degree angle on the headstock piece using the jig.

7. cut the 15 degree angle on the neck and glue and clamp the two together.

 

See attached photos!

Views: 10122

Attachments:

Reply to This

Replies to This Discussion

Very cool.  I just got a miter saw as a gift and was wondering how to do that.  I've been using my table saw for scarf joint cuts, but this looks much easier.

thanks! its very easy, just make sure to clamp the piece you are cutting to the jig as well or it may become a projectile.

Nice!! Good job!

Thanks!

 

And I've just found it fun to free-hand it on the chop saw.  :)  I should take the time to make the simple guide.

Yep, nice . I had a similar jig when I had a mitre saw. Saves a lot of time.

Thanks!  unfortunately, I didn't have it for my first build and I had to hack up the end of the neck for the headstock.

 

Nice and greasy goes down easy. Did my first one with a jig. I just used one piece of 2x4.
Attachments:

not bad, ED!

I know this is an old thread but just wanted to thank you for this post. After somehow miraculously making 3 cb instruments with scarf joints no problem, yesterday I couldn't saw a straight line to save my life, power tools or no. I ran across your guide and photos and built my own jig and it woooorrrks!! And it's safe! :) CBN to the rescue yet again!! Thank you!

Your welcome! I don't know why the photos came out so big in my post, but I'm glad they helped.  Just make sure your "C" clamps holding down the jig to the saw are on tight!

NICE!! Ive got a sliding miter saw a d thanks for a great tip!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

A.D.EKER replied to Southern Ray's discussion AI Search Query - Curious Answer
"Nice one Korigan !  The Vinger Slascher ?"
1 hour ago
A.D.EKER commented on Doug Thorsvik's video
1 hour ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

I Can Only Imagine: 2-String Chugger License Plate Cigar Box Guitar

"Head Slingers "The Steady Crew " Right On !"
1 hour ago
A.D.EKER commented on Dar Stellabotta's video
Thumbnail

Cigar Box Guitar 106 now for sale 🙌

"crunch Rocking DAR ! nice kit ! jangling julery! Slash Dar Johnson!! now on stage !!"
1 hour ago
A.D.EKER commented on A.D.EKER's video
1 hour ago
A.D.EKER posted a video

There i was Standing at the ..... BCB - A. D. Eker 2024

The Robert Johnson fight whit the devil, and there he was , standing on the Crossroads, waiting to meet the Guy that was going to change his way's, did he w...
1 hour ago
Southern Ray replied to Southern Ray's discussion AI Search Query - Curious Answer
" That's what I  thought!"
2 hours ago
Sam Beavers left a comment for BrianQ.
"Thanks Brian !!"
2 hours ago
AGP # liked David Hopkins's photo
8 hours ago
AGP # liked David Hopkins's photo
8 hours ago
AGP # liked David Hopkins's photo
8 hours ago
AGP # liked David Hopkins's photo
8 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->