I just spent all this time on my first cigar box ukelele and I'm kind of frustrated at the results.  The notes sound tinny and muted, more like a busted up kid's guitar than a ukelele.  I'm trying to figure out what I can tweak on it to get a decent sound. The most trouble i've had has been with the bridge and the strings either slipping out of their notches or sitting too high above the frets.  I'm not sure what the ideal distance for them above the fretboard should be. 

Anyways, any troubleshooting tips would be appreciated. 

Views: 350

Reply to This

Replies to This Discussion

Cigar box ukes are tricky to get sounding good.  The main problem is the nylon strings have very little mass compared with steel strings, so there is just not much energy in the form of vibration transferred to the top.  If you are using a floating  bridge, this makes matters worse.  In my experience it is much better to use a conventional glued-on uke bridge, then the tension of the stirrings is already "pre-loading" the top, getting a better response from it. Also, a thinner and more resonant  top will result in more volume and a better tone. Often cigar boxes, especially plywood ones  are just too thick and are difficult to get vibrating with the very light loadings that uke strings put on it. Your results sound exactly like the first cigar box uke I made..which was very weak and feeble sounding.

An immediate fix to try and improve things is to tune the uke up higher and/or put heavier strings on it in an effort to put more load on the top to get it moving. String height above the frets should be modestly low -  at the nut 1mm, at the 12th fret 3mm - you can go lower, but you don't want to be higher otherwise it will be hard to play and the notes will pull sharp when fretted.

Agree on everything CBJ suggested.

I made a beginner's video on string height, and posted it on my page. It may help a bit too:

http://www.cigarboxnation.com/video/string-action

I would check the break angle of the strings over the bridge/saddle and make sure you have plenty of downward pressure to the lid.

Can you explain what the break angle is?

Also, there are metal ukelele strings.  Would it make a difference to switch to them?

If you watch the video, I explain in detail what break angle is, and show video of what I am talking about.

Using metal strings would probably make a difference.

Ukes don't have steel strings - part of the technique of playing uke rely on the fact that they are nylon/gut strung - it's not going to sound like a uke or play like a uke with steel strings. You'll get some sort of a sound, and it might be louder, but personally, there's no way I'd want to play a uke with steel strings.

What is your bridge made of?, also maybe a picture would help us with the advice.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
51 minutes ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
56 minutes ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
2 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
2 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
3 hours ago
A.D.EKER commented on Ricky D's photo
3 hours ago
A.D.EKER commented on A.D.EKER's video
3 hours ago
Keith Rearick liked Doug Thorsvik's video
7 hours ago
Keith Rearick liked A.D.EKER's video
7 hours ago
Keith Rearick liked Doug Thorsvik's video
7 hours ago
Keith Rearick liked Ricky D's photo
7 hours ago
Keith Rearick liked Ricky D's photo
7 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->