Here's my first CB building blog. It's just a short one to get the hang of it. It's about making an accurate fret scale template for about 3$US as opposed to buying one for 40+$US. It has sub-millimeter accuracy with just a little care taken in its making. First, you need a 3$ 'Swanson' yardstick from Lowes i.e. (http://ity.im/07nkn). Of course it can be another quality brand from somewhere else as long as it has mm marked its full length. After completion of the template, it can be cut back to wahtever length you really want, the one in this blog and these pix is for a 30" Bass Scale. I like the 'Swanson' brand, I've bought 6 of them so far and have found Zero visual difference between any of them. Accurate enough I think. My frets and intonation come out near perfect so far after 23 builds.
On to the actual 'making':
Here you see I have the stick clamped against a board on my build bench.
I support behind the 'stick on each cut and 'guide the saw straight with a small block of hardwood.
I am using an Xacto saw blade.
The 'stick is aluminum and does not hurt the blade much.
I've used this blade for 20 years or more for wood, aluminum and brass.
After cutting the notches to about 1/8" or so (doesn't matter as long as you can see them) I highlight the marks in red Sharpie. I check and double check against my fret table (I use mm for frets) before each cut. I try to get as close to .5mm or .3mm or .7mm as possible when cutting between the full mm marks. I have created a plastic 'slide-guide' that is cut out the thickness of the 'stick on one side to help with parallax error since the 'stick is pretty thick.
Here you can see how the plastic slide-guide rests on the 'stick and on the fretboard itself.
The red marks are easy to find and the little slot acts as a natural stop for the slide.
But I find this to be the easiest method. Flip the 'stick over!! The 'stick is plain on the back! Straight and smooth!
I find my next slot with the Xacto #11 knife,
Slide the guide up to the knife, then
draw the blade out of the slot on the 'stick and along the guide for a great, thin, easy to find fret position mark.
After all the frets are marked, I put the Xacto blade in the knife mark and slide a small 4" square up to the blade and mark a line all the way across the fret board for the fretsaw to follow. The saw follows the knife blade mark very well.
Just an overall shot of the simple to make and best of all CHEAP $3 fret scale with sub mm accuracy!!
Best of all, since they are only 3$, you can make a different one for every scale, 25 inch for guitar, 13-15-17-20 inch for ukes and 30-34 inch for bass and still have less than 25$US all told! Way less than one scale template from a luthier supply store and way better than a printed paper template. I can mark a 20 fret 30 inch bass neck in about 30 seconds now with real good accuracy and total repeatability. And since there is a spare edge the 'stick could be used for a second scale but I like a separate 'stick for each scale to keep from confusing myself (pretty easy) and since they're only 3$US how can you go wrong!
Hope this can help some of you builders out there, especially the newer ones who haven't figured out all these handy tools and jigs that help us build better!
All comments welcome and anyone with a suggestion to improve this type template or this blog, please jump right in and share with us all.
Thanks for looking my blog over.
DrByte.
Comment
Such a FANTASTIC Idea...Thanks
M49
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods yesterday. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray on Monday. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies 4 Likes
Started by Brad in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Feb 19. 6 Replies 3 Likes
Started by Jacob Shook in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 16. 10 Replies 0 Likes
Started by Southern Ray in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Feb 16. 2 Replies 0 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!
You need to be a member of Cigar Box Nation to add comments!
Join Cigar Box Nation