#1 resource for Cigar Box Guitars, Free Plans, How-To, Parts & More!
Cigar Box Nation is sponsored by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!
Check out the attached photos. If you keep turning the truss rod adjustment nut, you will strip it. You will also destroy the truss rod and finger board. Do not over adjust the rod! This was a…Continue
I have a couple piezo-electrocuted guitars, and they tend to feed back on higher gain and volume settings. When I place my arm firmly on the box right aboot where the piezo is placed in the box it…Continue
Hi, I had to cut down a cherry tree that had some internal damage...I have salvaged several logs and have cut one into some boards..Right now I have 2" thick by around 29" long. I usually make necks…Continue
Hi, I made a nice walnut neck and cut frets and for the box at a 25.5" scale length..What I did not pay attention to was that I used extra length for the head stock...so now I have a neck cut for…Continue