"Here's my ascii version of what I did. I tried bolting onto the front of the box, with a very solid support block inside, and the neck moved over a few days. So I did it a different way and it has been solid and dandy. You glue a support block…"
"I glue a doubler block to the inside of the box, put in a 1/4-20 threaded insert in the neck, then glue the joint and bolt the neck on thru the doubler and box. It may be overkill, but the join is rock solid."
"Looks really good. I am currently building my first CBUke without throughneck design. I wasn't sure how much extra support it would need and I probably overdid it. I was worried as ths is my first 6 string Uke build and wanted to be sure i…"
"Fretboards vary in width a little, depending on maker. 1 3/8" for a tenor uke is about average I know Oscar schmidt makes one model with a wide fretboard. I'm doing 1 1/2" on my bass uke...it's a baritone size…"
"Perhaps its overkill, but I bevel the heal at around a 1 degree angle, then I drill two 3/8 inch holes and install threaded inserts, they are usually brass and are coarse on the outside and 1/4-20 on the inside. Cut SS all-thread…"