Cigar Box Nation

#1 resource for Cigar Box Guitars, Free Plans, How-To, Parts & More!

Cigar Box Nation is sponsored by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!

Build #5 - full

24.5" scale 3-stringer with poplar neck, maple fingerboard and my first attempt at inlay (shell fret markers). Dark tunk oil finish. Custom-made bridge with adjustable saddles. Chrome-covered humbucker with speed knobs on the side-mounted volume & tone. Deer antler nut and sealed tuners.

Comment

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comment by Matt Lieb on August 22, 2012 at 8:17pm

I made the bridge/tail piece from a 2"x2" piece of aluminum angled stock and filed the edges round.  After I drilled the countersunk holes for the screws, I polished up the face to a near-mirror finish.  The individual saddles are taken from a 6-string bridge.

Comment by David Prewitt on August 22, 2012 at 3:55pm

Where did you get the tail piece? I've been looking for that style.

Thanks David

New CBG T-Shirt!

Sponsors

Recommended Links & Resources

© 2013   Created by C. B. Gitty (Ben).   Powered by

Badges  |  Report an Issue  |  Terms of Service