Arturo Fuente " Death Card" 6 srting

Comment

Comment by the anonymous pick on August 4, 2012 at 12:32am

yup  ..  cool  ..  i  have   used this  method  befor  ..  simply    a  t shirt   iron   on     transfer  .

  it  works great    on light colored wood  , and   has  a built in    coating    .

http://www.youtube.com/watch?v=Qli-2VNODN8

 

and   i  had   good results

 

but    i  must  say  .. mine's  probably easier  ..  but  your s   looks  better  ;-)

Comment by Glenn Reither on August 4, 2012 at 12:23am

Oh, cool. The ones I have done were usually the flyleaf from inside the box. Paper is very unforgiving and very hard to get right.

Comment by Medicine Man CBG's-Mikel Doktor on August 4, 2012 at 12:16am

I print the photo on 3M Ful Sheet Lables, spray a lite coat of sealer on it. Once applied, I do only a couple of coats of matte ( wipe on) poly. I personaly don't like high gloss finishes. I had a couple get rained on a few weeks back, and they came out fine.

Comment by Glenn Reither on August 2, 2012 at 4:56am

Yup, that rocks. I've done some applique headstocks and they have always been a pain, getting a good finish. Got any tips or a brief description of your method?

Comment by Medicine Man CBG's-Mikel Doktor on August 2, 2012 at 2:30am

Thanks Guys.

 

Comment by Devil Man Guitars on August 1, 2012 at 5:21pm

Love this graphic! Very well done!

Comment by W.M. Peterson on August 1, 2012 at 6:57am

Boney Coolio Shite !