Cigar Box Nation

#1 resource for Cigar Box Guitars, Free Plans, How-To, Parts & More!

Cigar Box Nation is sponsored by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!

Randy S. Bretz's Discussions (277)

Discussions Replied To (14) Replies Latest Activity

"The whole basis of a rod piezo is it has to have pressure on it to work correctly. U…"

Randy S. Bretz replied Dec 18, 2012 to Rod PiezoInside the Bridge

24 Dec 19, 2012
Reply by Redbelly

"Get them out of the box and into a wood bridge base with a suitable bridge saddle"

Randy S. Bretz replied Nov 21, 2012 to Piezos...extreme frustration

9 Dec 5, 2012
Reply by Keith Stanford

"Here`s 2 custom rod bridges i did for a customer that wanted them to use on flat top…"

Randy S. Bretz replied Nov 19, 2012 to Rod PiezoInside the Bridge

24 Dec 19, 2012
Reply by Redbelly

"I cut one down for this 2 string build i did. The rod was cut down to a 1 1/4" lengt…"

Randy S. Bretz replied Nov 19, 2012 to Rod PiezoInside the Bridge

24 Dec 19, 2012
Reply by Redbelly

"On my basic model rod piezo bridge the rod sets on the lid of the box. I make up the…"

Randy S. Bretz replied Nov 19, 2012 to Rod PiezoInside the Bridge

24 Dec 19, 2012
Reply by Redbelly

"Thx...been doin it for many many years. Here`s a batch of rod piezo bridges for one…"

Randy S. Bretz replied Nov 19, 2012 to Rod PiezoInside the Bridge

24 Dec 19, 2012
Reply by Redbelly

"On my custom rod piezo bridges the rod sets on the lid but the slot is the exact wid…"

Randy S. Bretz replied Nov 17, 2012 to Rod PiezoInside the Bridge

24 Dec 19, 2012
Reply by Redbelly

"Film piezo"

Randy S. Bretz replied Oct 6, 2012 to Sources for PVDF sensor cable

3 Oct 6, 2012
Reply by Randy S. Bretz

"http://windworld.com/products-page/electronic-hardware/piezo-cable-sold-by-the-inch/…"

Randy S. Bretz replied Oct 6, 2012 to Sources for PVDF sensor cable

3 Oct 6, 2012
Reply by Randy S. Bretz

"Bone...their carved from bone and the saddle is all one piece, i chamber out underne…"

Randy S. Bretz replied Apr 14, 2012 to Isolating the piezo

15 Aug 22, 2012
Reply by rusty case

RSS

New CBG T-Shirt!

Sponsors

Recommended Links & Resources

© 2013   Created by C. B. Gitty (Ben).   Powered by

Badges  |  Report an Issue  |  Terms of Service