*Very* decent quality, 5/16" thick solid cedar top.  Sounds nice on my box tester, good volume, wonder if dishing out the back 1/16" or 1/8" would make it louder?

Views: 2360

Replies to This Discussion

Chuck,

 

Gorgeous box!

 

If you have the capability to do a "TV rout" (you know, like an old style TV screen with rounded corners), dishing it out on the backside to 1/8"final  thickness should improve the vibe characteristics of that top as a soundboard wonderfully. Is this gonna be an acoustic, or an acoustic-electric build? On your builds, do you do neck-throughs or bolt-ons? If neck-throughs, do you screw the top to the neck at the bridge and neck-set ends? Only reason I ask is that would determine how close you get to the edge with your router bit.

 

Are you comfortable removing that much material for a 1/8" final thickness? I don't dare to suggest you go to a 1/16" final thickness, since you might feel like you'd have to brace it - and 1/32" final thickness, I think you'd definitely need bracing. Plus the discomfort of cutting that deep into such a fine chunk of wood - one slip, and "Oh, SH****T!"

 

Louder (more volume) will also come from sound hole design and placement. What are your thoughts on that for this build?

 

Can't wait to see what you do with it. Would it, p'r'aps, we wonders, my precious, be for sale? ;-)

What is this "Box tester" you are talking about?


Der Groovemeister said:
What is this "Box tester" you are talking about?


OMG wonderful idea.

That is amazingly clever!
Gooseneck scraper, no jigs, no setup.  Check depth with a straightedge and a slim taper of wood, like half of a clothes pin.  3/16" min. top thickness. This'll be bolt-on, lets me use a shorter neck blank.  Electric-acoustic, using prewired Strat harness.  Stylized F-holes, shame to hide that nice solid cedar under grommets.

Oily "Strat-O'-Nine-Tales" Fool said:

Chuck,

 

Gorgeous box!

 

If you have the capability to do a "TV rout" (you know, like an old style TV screen with rounded corners), dishing it out on the backside to 1/8"final  thickness should improve the vibe characteristics of that top as a soundboard wonderfully. Is this gonna be an acoustic, or an acoustic-electric build? On your builds, do you do neck-throughs or bolt-ons? If neck-throughs, do you screw the top to the neck at the bridge and neck-set ends? Only reason I ask is that would determine how close you get to the edge with your router bit.

 

Are you comfortable removing that much material for a 1/8" final thickness? I don't dare to suggest you go to a 1/16" final thickness, since you might feel like you'd have to brace it - and 1/32" final thickness, I think you'd definitely need bracing. Plus the discomfort of cutting that deep into such a fine chunk of wood - one slip, and "Oh, SH****T!"

 

Louder (more volume) will also come from sound hole design and placement. What are your thoughts on that for this build?

 

Can't wait to see what you do with it. Would it, p'r'aps, we wonders, my precious, be for sale? ;-)

Chuck,

 

Thanks for the detail. 3/16" is how thick my plywood soundboard tops are, and they resonate pretty well. Sounds like it's gonna be a lovely build.

Try this at home...

Rodney,

Nii-iice!!!! Struts and routing out all in one. That's the idea...
Would look kinda cool installed inside out.
Yeah, kinda Steampunkish.
What are the effects of simply dropping the tuning a step, third, fifth, octave, etc?

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Adhesive Removal

Started by Habanera Hal. Last reply by Fantacone Box Works Mar 12, 2022. 9 Replies

Accurate Drill Tricks?

Started by Danny B.. Last reply by Fantacone Box Works Mar 12, 2022. 7 Replies

scarf joint

Started by PattJ. Last reply by Fantacone Box Works Mar 12, 2022. 2 Replies

I'm building a triple neck guitar and I have no idea why ..

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Wichita Sam Feb 11, 2022. 4 Replies

Springs in the guitar? ...What gives?

Started by Danny B.. Last reply by Mikala Aug 29, 2019. 23 Replies

Single coil Pup location

Started by HarleyTodd May 8, 2019. 0 Replies

Baritone Ukulele

Started by John Hopper. Last reply by Bob Johnston Mar 28, 2017. 5 Replies

hard to play

Started by Billy Heintz. Last reply by Mark Bliss Nov 16, 2016. 9 Replies

Condenser Guitar Microphones for CBG?

Started by Danny B.. Last reply by Fomhorach Nov 10, 2016. 4 Replies

Adjustable bridges?

Started by Danny B.. Last reply by Danny B. Nov 9, 2016. 3 Replies

Protecting old boxes

Started by Danny B.. Last reply by Paul Craig Sep 13, 2016. 4 Replies

Cohiba box, thick top

Started by Chuck Dubman. Last reply by Danny B. Sep 13, 2016. 19 Replies

Use for mahogany cigar box "spacers"

Started by PhilUSAFRet. Last reply by Order99 Feb 7, 2016. 6 Replies

inlays fret markers

Started by Paul Cooper. Last reply by Paul Craig Sep 15, 2015. 22 Replies

Heel shaping ideas and process

Started by 14 buck bass (aka antonio). Last reply by The Phrygian Kid Apr 19, 2015. 21 Replies

CBG neck on router table

Started by Servaas (Der Groovemeister). Last reply by Brandon Barnard Nov 22, 2013. 6 Replies

Trimming a soundboard for my upright bass

Started by Wade. Last reply by jen harrison Nov 20, 2013. 6 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
12 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
12 hours ago
Kent Thurston updated their profile
13 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
14 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
14 hours ago
Poorness Studios liked A.D.EKER's video
16 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
16 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
19 hours ago
A.D.EKER commented on A.D.EKER's video
22 hours ago
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
22 hours ago
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->