Replies to This Discussion

Permalink Reply by Ron "Oily" Sprague on January 2, 2013 at 7:34pm

Kieth,

Depends on your scale length, and whether you want to fret diatonically, like a dulcimer (which may be the ones you refer to as having "erratic" fret spacing), or chromatically, like a normal guitar. There is a Group here on CBN for discussions of scale length, fretting and fret marking. Decide on your scale length you wanna build (scale length is the distance from the nut to the 12th fret, which should be the same as 12th fret to the bridge, or more simply, the distance from the nut to the bridge. Common commercial guitar scale lengths are 24 3/4" to 25". You can use several freely available fret calculators, such as the one on the Stewart MacDonald luthiers' supply website, or Dan Sleep just posted here on CBN a day or two ago a zip file of printable fret scales ( use the Search, Luke;-) ).For a one string diddley, another way of determining fret position is to get a cheapy electronic tuner and a slide, and determine the true tone position "by ear," moving the slide until the tuner registers the proper whole note. You can also dig through the Discussion here, as I suspect your problem has come up before. Good luck with your build!

Permalink Reply by Ron "Oily" Sprague on January 3, 2013 at 12:27am

Kieth

Some links to Wes Carl's and Dan Sleep's fret calculators / templates:

http://www.cigarboxnation.com/profiles/blogs/yet-another-fret-calc-...

http://www.cigarboxnation.com/profiles/blogs/2592684:BlogPost:1370568

And the link to the Stew-Mac online calculator:

http://www.stewmac.com/FretCalculator

Permalink Reply by Keith Stanford on January 3, 2013 at 5:30am

Thanks for the reply, "Oily". That is exactly the info that I needed. After I looked up your location, I figured out what you do and where you got the nickname. <grin>

Be well,  my friend....

kieta

Permalink Reply by Wichita Sam on January 3, 2013 at 8:22am

I'd suggest using markings comparable to the diatonic fret pattern common to dulcimers..

 

 

Permalink Reply by Bob Taylor on January 27, 2016 at 8:34am

Hey, Amigo! I have the same question. From what I understand, now that I have completed my first build, is that you want to mark the 3rd, 5th, 7th, 9th and 12th frets. Repeat for the 2nd octave, if desired. I understand about using online fret calculators, or a piece of string to find these measurements. But.....what about using a digital tuner to find them? Just a thought. I'm no musician, but it seems feasible to me.