Stomp box

Replies to This Discussion

Permalink Reply by bairfoot cajun on February 16, 2009 at 6:19pm

you might could get some more info from second hand cbg,s video on how to make a stompbox. its fairly new so maybe you havent seen it yet,check it out.

Permalink Reply by smojo on February 22, 2009 at 7:09am

Thanks guys, I'll try a few of those ideas.

Permalink Reply by BT Cohosh on February 26, 2009 at 7:33pm

I feel like I just saw something about this--a guy built one but used a bass drum trigger (I have no idea what that is) on the inside.

Permalink Reply by smojo on February 27, 2009 at 11:24am

Yeah I saw the drum trigger. They seem to be more or less a piezo disk, same as what i use for pickups. Don't know what drummers use them for though. Maybe just to detect the drum 'hit' and trigger some other electronic device. Can't see how they are any better than just using a piezo.

Permalink Reply by Roosterman on March 1, 2009 at 12:24pm

Hey Smojo, I know how you feel! I spent ages trying to get a good sound out of my guitar body stomp box thingy... different pickups / mics, different positions, different coverings (carpet, foam, rubber... tried 'em all!). Eventually I stuffed it full of old cushions and sheets an rags and bingo... much better!

Permalink Reply by Hamhock on March 23, 2009 at 4:42pm

Smojo,,,i saw one of the most simple designs the other day that sounded better than all the stompboxes ive ever heard before...
this fellow took one of the stickon piezos (the kind you stick on the top of your guitar or ukulele or whatever) and wrapped it snuggly with some foam rubber packing material he had, and placed it in a low profile cigar box. Now the piezo isnt touching anything, just the foam that surrounds it, and the foam is loose enough that when you close the box, the foam touches the top and bottom. By tapping your foot on the box the vibrations are transmitted through the top and into the foam producing a nice dull thud. Hey ...give it a shot...

Permalink Reply by smojo on March 24, 2009 at 4:32am

Sounds good thanks

Permalink Reply by David Beede on April 28, 2009 at 1:04pm

I was scanning this Stomp Box thread and ran across something that made me think "Hey, that's exactly how I made MY stomp box!" then I saw it was posted by Ham and realized it WAS my stomp box.... LOL

Anyway - here's my theory. The sound we get when mounting piezos is effected by out attachment method. The crispier the adhesive - say epoxy or CA (super glue) and you get a really bright, brassy response - or at least as many highs as that particular piezo is capable of. If we use soft stuff like silicon caulk type adhesive, or foam tape, or PL Concrete seal and the like - we get less highs and more mids and bass. Soooo, since all I wanted was a big fat bass drum sound I figured what kind of attachment would filter out the most highs and not rattle around obnoxiously? So I thought - why not NO attachment? So I did what Ham said - wrapped the pickup in foam rubber - the very squishy, not at all dense, kind about 1/2" thick foam. [it was actually a box liner with a kind of cheap velvet like flocking on one side, though I doubt that made a lot of difference] That took out almost all the "slap" sounding highs. I did do one more thing, which was to wrap the box itself in several layers of that "non-skid" drawer liner stuff.
Anyway - it worked for me.
When I get a chance I'll upload an audio clip of it.

Permalink Reply by Otis Driftwood on July 24, 2011 at 12:18pm

i built mine by placing a 6 inch stero speaker right under the lid and  wiring it to a quarter jack. Sounds like the deep thud of a bass drum.

Permalink Reply by Sumner McLain on September 27, 2012 at 5:58pm

i've seen people use speakers for this- i just don't get how a speaker (output) becomes a pickup (input)? I'm really just starting on this whole diy audio stuff, but is there any specific way you wired the speaker up? Any input would be appreciated

Permalink Reply by wormil on September 28, 2012 at 12:55am

I saw a CBG someone made and used a small speaker as a pickup. They mounted it under the lid like a piezo, seemed to work fine but it was playing through a tape recorder turned into an amp so it sounded tinny, hard to tell anything.

Permalink Reply by Tony Davies on October 28, 2011 at 6:08pm

I used UHU glue and gaffa tape - seems to work well