Replies to This Discussion

Permalink Reply by Ducati Scotty on November 14, 2017 at 1:37pm

Oh I like that! A bit messy to build but super light, super secure, and will fit like a glove! And a 4'x8' 1/2" sheet of pink stuff is only $8 locally. Plus, once you build the foam box, it makes a great form for bending the cardboard around it. Building a big box with no form is a bit awkward.

Pretty sure this is how I'll do it. Thanks David!

• ▶ Reply

Permalink Reply by Ducati Scotty on November 15, 2017 at 6:54am

Ok, to take it one step farther into the ridiculous: build the foam box, put the guitar inside a plastic trash bag too protect it, lay the guitar in the box, use expanding spray foam to fill in the gaps and seal the whole thing in super snug.

I think if you did that you could probably even safely skip the cardboard wrap.  You've basically encased it in a single block of foam. 

Hmmm..... Maybe skip the foam box altogether.  Just build a rectangular form, line with plastic, spray in some foam, lay guitar in, spray in a little more foam on top and wait for it to set.  No messy foam boards to cut, still costs just a few dollars per guitar to pack.

Yeah, I think I'm getting silly now, but I'm still thinking of trying it.

• ▶ Reply

Permalink Reply by Richard Dean on November 15, 2017 at 7:08am

I just chose a random Oregon and New York zip codes, put in the info in the USPS postage calculator, and my last git I sold("The Gambler") which in all reality, was a little heavy for a Git, and with packaging(and I package well) would have cost less than $23 priority mail. My total box size was 4x8x36" and weighed with packaging 5#'s, it arrived safely to a happy buyer.

That was a home made oak box with electrics and a lot of embellishments.

• ▶ Reply

Permalink Reply by gary herget on November 15, 2017 at 12:23pm

I use an 8 x 8 x 36 box and USPS has never charged more than $25.00 with insurance.

• ▶ Reply

Permalink Reply by Bluesheart on November 16, 2017 at 4:14am

Yep, shipping my last commissioned build from MA back to VA cost 85 bucks. Lucky for me my cx offered to pay for the shipping but dang. That did include them boxing it up too, so maybe not that bad I guess.

• ▶ Reply

Permalink Reply by Ducati Scotty on November 17, 2017 at 10:28am

I picked up a 4x8 sheet of 1/2" foam today.  Hopefully I can get a box together over the weekend.  I'll weight the guitar by itself and again boxed up to give you the info.

Thanks again for pointing me to that link David.

• ▶ Reply

Permalink Reply by David L. on November 17, 2017 at 1:55pm

You are welcome Ducati, always happy to point to the hidden gems experts like Wichita Sam have added over the years :0)

• ▶ Reply

Permalink Reply by Ducati Scotty on November 18, 2017 at 9:16pm

I weighed the guitar, it’s 2 1/2 pounds. I also pieced the box together. Now I just need to do some final duct taping, wrap it in cardboard, and ship it. I expect it will cost about $20. Much smaller box at 38” x 10” x 5.5”.

• ▶ Reply

Permalink Reply by Richard Dean on November 19, 2017 at 2:25am

I never use Duct tape, only clear shipping tape, some post offices frown at other tape for packaging.

Good job on getting the weight and size down, makes a big difference.

• ▶ Reply

Permalink Reply by Ducati Scotty on November 19, 2017 at 3:55am

Duct tape is just to hold the foam box together. That will be wrapped in cardboard and maybe paper with just clear tape, like you say.

• ▶ Reply

Permalink Reply by Ducati Scotty on November 19, 2017 at 11:05am

All set! Final packaging was 5# and 39” x 11” x 6”. Should cost about $22 to ship. Thanks again to everyone for your help and suggestions.

Attachments:

• 0A2AF460-860E-46F2-AF1A-26305713D2D1.jpeg, 2.7 MB
• 1F8E38CC-70C9-4042-B17B-F861EEAA8C68.jpeg, 2.1 MB

• ▶ Reply

Permalink Reply by Richard Dean on November 19, 2017 at 11:12am

Only thing you need now is my address...;-)

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page