#1 resource for Cigar Box Guitars, Free Plans, How-To, Parts & More!

Cigar Box Nation is sponsored by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!

need help!!!!!!!!!!!

can you attach a separate piece of wood for a headstock and a separate piece for the neck and will it break under stress for a 4 stringer??

It all started when...........
I was putting together my deluxe kit( sorry MR Dukes) and dove tailed the end where the machine heads are, and the curve caused one of the
machine heads to bend, now it won't tighten the string. So can I lop of
the whole headstock and glue a new one on??? or will it snap under pressure I need ideas here folks this is only my second build.

note photo with graphics the dotted line is where I was thinking of cutting off the neck, and adding a new one.

Tags: headstock

0 members like this

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by GI Junker on August 26, 2010 at 3:57pm

glued new headstock on, it deff wasn't easy but I made it wider than my last and it has given me more cosmetic options..will post pics when done

▶ Reply

Permalink Reply by Micah Haley on August 26, 2010 at 7:00pm

It won't be pretty but...

I looks like you just need a small shim under that tuner so it has a flat surface to mount to.

That way it wont warp when you tighten the screws.

Kartereo said:

it will just bend again because of how I shaped the neck

Diane in Chicago said:
Can't you just put on a new tuner? Is it not tightening because the tuner is bent and the gears no longer work?

▶ Reply

Permalink Reply by GI Junker on August 27, 2010 at 2:04am

yeah that was my first thought but I wound up cutting the headstock off all together, my goal was to build something aesthetically pleasing.

Micah Haley said:

It won't be pretty but...

I looks like you just need a small shim under that tuner so it has a flat surface to mount to.

That way it wont warp when you tighten the screws.

Kartereo said:
it will just bend again because of how I shaped the neck

Diane in Chicago said:
Can't you just put on a new tuner? Is it not tightening because the tuner is bent and the gears no longer work?

▶ Reply

Permalink Reply by GI Junker on March 1, 2012 at 12:26am

Ok so here it is 2012 feb 29 and I solved my issue I cut the headstock off and did a scarf joint. Three yrs ltr it is still holding up. Conclusion......scarf joint if done correctly can hold the strain of four stringer.

▶ Reply

Permalink Reply by JUJU on March 1, 2012 at 6:08am

i was going to leave a reply then i noticed i was 2 yers too late lol !

▶ Reply

Permalink Reply by GI Junker on March 1, 2012 at 11:32am

Thanks anyway, thought that counts right

▶ Reply

Permalink Reply by South Paw,Davey on March 1, 2012 at 12:16pm

I would take some wood from the back of the head till the tuner will sit flat. Looking at the pictures it would not take alot and you could re finish it. You would never know. Scarf joints are great when you have the neck free and before caving square and flat so to say. When carved I would find it hard to cut and get the other angle to match up. you only need 3 to 5 mill off. Sand it back and save your self a lot ot time and pain. Then play that baby!

Dave

▶ Reply

Permalink Reply by Bluesheart on March 2, 2012 at 9:55am

Maybe you could just put a shim or spacer under the tuner and use a longer screw to use it as it is? Or just remove that tuner and use it as a 3 stringer. You could fill the hole or use it as a hanger!