Making another pickup...  Below is my setup.  The Fiskars hand drill is 3.5 to 1 ratio so 100 turns of the handle = 350 turns of the pickup.

I'm using nails for the metal part of the magnetic pickup and a flat rare earth magnet that will be glued to the bottom (the middle nail will be cut to length after I wind the wire).  The nail heads are countersunk... which I learned from my last one needs to be done.  I had tried nails last time thinking the flat head would be better than a bolt head, but it is still too tall.  I think it will work better this time like this.

Any thoughts or suggestions?

Now I need to find a cheap, easy way to count the revolutions of the pickup so I don't have to do it in my head.

Views: 1304

Reply to This

Replies to This Discussion

I went through 3 different calculators.  None had a regular circuit board under the keys... all had a plastic film instead.

Well done, it's looking good. I use the thickness of the top of the bobbin to control the height of the pickup. I use a design where the fingerboard is raised above the box lid (say if I use a 1/8" fretboard, it will sit 1/8" above the box lid, and I can then use a scrap of the same wood to make the bobbin top.) Make sense?

Yep.  Makes perfect sense.  I'm using the same thickness (1/4 inch) fret board to sit on top of the box.  So it sounds like I'm doing the same thing as you describe.

Finally got my pedometer and hooked it up.  Works great!

I had the rare earth mag on the chuck so long it magnetized it...  At first I was dbl-counting revolutions until I took the magnet off and it counted them correctly.

Sounds like a ped. might count faster than a cheap calculator... Back to the $ store for me...

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

BrianQ. posted a status
"R.I.P. Dickey Betts, Thanx for the memories!!!"
1 minute ago
BrianQ. replied to Rich Butters's discussion UK - Best Place to Buy Cigar Box's
"Ever heard of The Godfather of cigarbox guitars? He has a one stop shop store complete with all the…"
6 minutes ago
BrianQ. replied to J. D. Woods's discussion Are metal frets necessary?
"Here’s a video, if you’re not into lengthy reads? …"
20 minutes ago
T-Gripped liked Ghostbuttons's photo
20 minutes ago
T-Gripped commented on Crazed Fandango's photo
Thumbnail

Frethound 4 String

"Cool shot with those wildflowers in the background and your wonderful instrument leaning against…"
23 minutes ago
T-Gripped liked Randy S. Bretz's photo
24 minutes ago
T-Gripped commented on Randy S. Bretz's photo
Thumbnail

Off the Bench !

"Yowzers! Awesome!!"
25 minutes ago
BrianQ. liked Randy S. Bretz's photo
31 minutes ago
BrianQ. replied to J. D. Woods's discussion Are metal frets necessary?
"A 3 string slider is fretless, but the higher action will take more pressure to fret notes without…"
32 minutes ago
J. D. Woods posted a discussion

Are metal frets necessary?

Hey there fellow CBN plunkers, strummers and sliders,I'm getting ready to construct a 3-string…See More
48 minutes ago
Glenn Kaiser commented on Glenn Kaiser's video
Thumbnail

GK less Paul Diddley Bow

"Thx Doug, truly fun to create and use. Plugged into a stomp box, then amp, truly amazing little…"
3 hours ago
Glenn Kaiser commented on Glenn Kaiser's photo
Thumbnail

Less Paul by GK

"Thanks Doug, a joy to build. I'll play it tomorrow night in a show. -Glenn"
3 hours ago

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->