Replies to This Discussion

Permalink Reply by Ron "Oily" Sprague on July 14, 2014 at 4:46am

Elliott,

Send JuJu a Friend Request here on CBN:

http://www.cigarboxnation.com/profile/soundssogood

I'm sure he'd tell you how he did his.

• ▶ Reply

Permalink Reply by Elliot on July 14, 2014 at 10:35am

Thank you thank you thank you thank you heaps, I will, chears

• ▶ Reply

Permalink Reply by Reeds Taylor on July 14, 2014 at 11:13am

I recently built a neck through CBM...from all the videos I'm seeing online it seems to be holding up quite well.

• ▶ Reply

Permalink Reply by Elliot on July 21, 2014 at 3:12pm

Sound good?

• ▶ Reply

Permalink Reply by Reeds Taylor on July 21, 2014 at 6:38pm

Yes sir

check this out...

https://www.youtube.com/watch?v=RiYXE8K7sBM

Oh and btw ...this is a neck thru (just too the inside tail end)...with a neck support.

You can see from the back side how I adapted the neck....using glue and screws. As well the tail piece screws and strap pin screw enter into the end of the neck....so she ain't moving.

Happy building!

Oh....message me if I can help.

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page