Cigar Box Nation founder, Shane Speal created this weird monstrosity of a lap steel guitar using salvaged materials.  He documented the whole process here.

Yesterday, I got the urge to build something new, so I went into my woodshop and challenged myself to make something within one hour.  The time restriction made the project even more interesting and added an element of excitement.

Here's the demo video...

Note:  I am giving this guitar away to one subscriber of my Shane Speal newsletter.  You can enter by signing up at www.ShaneSpeal.com.

I had purchased four salvaged balusters from Re-Source York, an architectural salvage company run by a local York PA charity. Each tattered and paint-chipped piece only cost me $3!

I decided to turn one of these balusters into a 4-string lap steel.  Here's the parts list:

The first thing I did was to use a C. B. Gitty Centering Ruler (Buy - $8.99) to find the center point for bridge mounting.  This ruler is a genius tool that is essential in my workshop.  Simply place it on your project, match the numbers up on each side of the ruler and bazinga, you have a centerline.

Now that I had a center line, I could mount the bridge.  These Hardtails are a delight to use.  I especially liked the 4-string model for this project because it is designed to have the strings fed through the body and up over the saddles.  Since the salvaged baluster was weakened due to age, having the strings fed through the body gave the bridge one extra anchor to hold it tight.  

To get the strings fed through the body, I used a 7/64" drill bit and drilled right through the string holes under the saddles.  

I added economy string ferrules on the back of the body to keep the ball-ends of the strings from pulling through the wood.  Simply tap them in with a C. B. Gitty Fretting Hammer.

I must admit, the headstock was a bit of a mess.  I used a 1" forstner bit to remove some wood from the backside where the tuners would be mounted.  This is because the wood was too thick for the tuners' shafts.  The end result is kind of ugly on the back, but that's the challenge of building something within one hour!

I drilled and mounted the tuners.  Because I didn't have a lot of room for the tuners, two of them are actually mounted at the top of the headstock.  It just adds to the quirkiness of the guitar.

The pickup was easy to mount.  Dan Sleep's "SleepTalker" pickups are so thin, you don't need to route the body for them.  Just screw 'em to the top of the body!  I drilled a small hole under the pickup for the wire, which dangles out the back of the lap steel.  I then hardwired it to the Neutrik jack and mounted the jack plate.

I chose a C. B. Gitty floating bridge as the nut because I knew I could dig some very deep string slots in it.  (They need to be deep to handle the radical angles of the headstock string pull.)  I used a cutting bit on my Dremel to cut the string slots.

Finally, I strung the beast up. The biggest challenge was positioning the nut and the string angles at the headstock.  I had to add some round head screws to act as string trees.  It's tuned to open G (GDGB) or G Minor (GDGBb)

This was a fun build that went fast. (It took longer to blog about it than to actually build it!) 

 

Views: 1209

Reply to This

Replies to This Discussion

i like it !!! 

Nice work.

That Flat pickup sounds like a true Lap Steel pickup with that aluminum casing. Sweet

Mighty fine!

RSS

The Essential Pages

New to Cigar Box Nation?How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Next CBG event in the UK?

Started by Wal Callaby in Fests and Concerts: Organizing and Promoting. Last reply by Blind Boy Fullers 14 minutes ago. 2 Replies

pickup

Started by Joe Williams in Performances, How to Play, Lessons, Concerts. Last reply by Cause the Blue rat 18 minutes ago. 9 Replies

Build This DIY Guitar Fuzz Pedal in 10 Minutes - VIDEO

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Paul Craig Jul 8. 19 Replies

Cigar Box Kalimba - Builder's Notes, Hacks & Blues Tuning Mod

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Shane Speal shanespeal.com Jul 7. 7 Replies

Latest Activity

Andries D. EKER commented on Andries D. EKER's video
Thumbnail

Moaning Black Snake A D Eker 2018

"Thank you kindly Derek, glad you liked it! closeup recorded aucoustic play! where you put your mike…"
2 minutes ago
Blind Boy Fullers replied to Wal Callaby's discussion Next CBG event in the UK?
"In the past Stumblecol has set up the all-dayer Cambridge CBG Festival at the Earl of Beaconsfield…"
13 minutes ago
Cause the Blue rat replied to Joe Williams's discussion pickup
"A volume pot actually helps the sound of it as well. Without it the mag can get a bit…"
17 minutes ago
Clarky commented on Dar Stellabotta's video
Thumbnail

My first vinyl record at Third Man Records ⚡️⚫️⚡️

"That is cool as hell!  I'd love to do something like that one day."
1 hour ago
Clarky commented on Clarky's video
Thumbnail

Wenatchee - Seasick Steve on Cigar Box Guitar

"Thanks for the kind words Dennis, Snuffy, James and Danny.  I'm the same Dennis, I spent…"
1 hour ago
Diglydog commented on Dar Stellabotta's video
Thumbnail

My first vinyl record at Third Man Records ⚡️⚫️⚡️

"That's neat.  It's like a modern single with a built-in vintage vinyl sound. …"
1 hour ago
Dennis Goodinson liked Dar Stellabotta's video
1 hour ago
BeetleJuice! commented on BeetleJuice!'s video
Thumbnail

Glass Slide -3- string Cigar Box Guitar

"thanks again!....noting beats a cigar box guitar for old time slidezy blues"
2 hours ago
Dennis Goodinson liked Richard Sundberg's video
2 hours ago
the anonymous pick commented on Dar Stellabotta's video
Thumbnail

My first vinyl record at Third Man Records ⚡️⚫️⚡️

"very cool . if i am relating to  the same machines ,(and heard the story right )  i…"
2 hours ago
Dar Stellabotta posted a video

My first vinyl record at Third Man Records ⚡️⚫️⚡️

Just made my first vinyl record at Jack White’s Third Man Records in Nashville TN. ⚡️⚫️⚡️third man records
2 hours ago
Danny Gordon commented on Jason Taulbee's video
Thumbnail

Roll & Tumble Blues Bottleneck Slide Cover on Cigar Box Guitar and Tenor Ukulele

"great sound on all 7 strings love the tune kind of catchy"
3 hours ago

Music

Loading…

© 2018   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service