first kit?

Replies to This Discussion

Permalink Reply by jeff heister on March 26, 2012 at 6:08pm

ok. have most all the part assembled.

any tips on where to place the pick up underneath? have read too place it close to the bridge.

obviously with a neck running bow to stern it cannot be directly under the bridge. So, close?

Also, with a neck running all the way through, how do you place in a traditional , 'crocker type' of pu?

Notch the neck and place it in?

Thanks for the advice all.

Jeff H.

Permalink Reply by wormil on May 30, 2012 at 12:14pm

You'll want to relieve the neck under the lid (a really wide dado) to allow the top to vibrate, should also give you room for a pickup. 

Permalink Reply by Ellwood T. Bear on May 30, 2012 at 1:42pm

Like this

Attachments:

• NeckAttachment.JPG, 30 KB

Permalink Reply by jeff heister on May 30, 2012 at 2:54pm

great diagram man

will probably use on the next project

thanks!

JH

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page