Someone had mentioned using wsome knives and even a potato peeler that they had found at an Asian Market for shaping the necks on their CBGs. Unfortunately, unlike Arlington which has a huge Asian Market or two, Wichita Falls is much more limited. I did find some nice stainless sink strainers that are a bit different than what I have seen used on most CBG builds. I was in a rush and only had enough cash on me to pick up one and a potato peeler that is listed as a Barbarian head peeler of stainless steel. Each cost just about $4 bucks.

Any rate, here are some pics if I can load them to show what they look like. Hopefully I can visit arlinton in the near future and check out the larger markets for goodies. I have a spoke shave on order at Home Depot that should be here in a few days. These should all be some extra tools to help in shaping the neck for my CBGs.

 

Just sayin' don't forget to check out your local Asian Market, as they may have something interesting and of use to you for your CBG build.

 

The strainer was lain onto a couple of different Arturo Fuente boxes just to get an idea of how they may look. They had smaller sink strainers, but I opted for this larger one for a possible sound hole cover.

Views: 579

Reply to This

Replies to This Discussion

The boxes used were about 7 1/2" X 9 1/2" and 9 1/2" X 9 3/16" in size. The strainers were only laying on top of the boxes and not insterted into them at this point. The smaller strainer may be a better choice, but that is up to the builder to decide.

Yes, I have the spoke shave on order at Home Depot. Unfortunately, even though their on-line store does not say they can be ordered on-line only, the folk at my local Home Depot seldom know what they sell. It is no better at my local Lowe's in that regard, either. None the less, I have their spoke shave on order and will pick it up at their store in the next few days. It was cheaper, even with tax, than purchasing the same thing on Ebay, even with free shipping.

Note:

I did take the shown potato peeler to a piece of red oak just to see just how it worked. It will indeed peel back the wood and could be used to shave some of the wood ok, but the thing is really for a left-handed person if you want to draw it toward you. The blade is just not put on to allow a drawing motion towards the user unless your left-handed, but will cut if pushing it away if your right-handed and using it. The blade parts are rivited together and I just can't see any way to swap the handle to the opposite side to make it work in a drawing motion for a right-handed person.

They also have an assortment of knives at these Asian Markets, but I am not sure which may be ok to use for shaping a neck with. These two markets here didn't have the knives, but I have seen such in Arlington at the larger Asian Markets.

As you say, the spoke shave is likely an awsome tool to use. I am anxious to get mine in a give it a try.

Thanks for the info.

Huey 

Cool

I am sorry for being so late in on this thread but I think I was the one giving the original tip on the peeler and knives

The Kiwi brand knife was $1.85 and is hollow ground one side and flat on the other - they call it a seeding knife. I have only seen one place that carries this particular little gem. it is perfect for whittling and I even cut one off and ground it down to make my own marking knife.

The next picture shows the potato peeler's effect on meranti. Every asian grocer I have ever been in has either had these or has an empty spot where they used to be and are about to be restocked. The price is usually around five of our Australian dollars. While not as fast as an angle grinder with a 40 grit flap wheel there is a lot less noise and dust

ending up with something like this.

Still needs sanding and finishing but this is a great way to rough out a neck.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

Doug Thorsvik commented on Randy S. Bretz's photo
Thumbnail

Off the Bench !

"Truly amazing Randy! A stunning build. Craftsmanship at its finest…"
54 minutes ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Up the Hill A D Eker 2024

"I’m with Kale; the shaker sound nicely offsets the guitar groove… Cool Andries!"
1 hour ago
Doug Thorsvik commented on Glenn Kaiser's video
Thumbnail

GK less Paul Diddley Bow

"Love that outside the box thinking! Less Paul, more Glenn! You are having way too much fun…"
1 hour ago
Doug Thorsvik commented on Glenn Kaiser's photo
Thumbnail

Less Paul by GK

"Wow! Less Paul is definitely more Glenn!!! Simple and cool; a great combo."
1 hour ago
Bernie Edwards commented on Randy S. Bretz's photo
Thumbnail

Off the Bench !

"The cherries make it really even more special!  Great project with a unique and special result!"
6 hours ago
Crazed Fandango replied to Rich Butters's discussion UK - Best Place to Buy Cigar Box's
7 hours ago
Crazed Fandango commented on David Woodman 's photo
Thumbnail

IMG_0749

"Amazing!"
7 hours ago
Crazed Fandango liked David Woodman 's photo
8 hours ago
Crazed Fandango posted a photo
8 hours ago
Rich Butters posted a discussion

UK - Best Place to Buy Cigar Box's

Hi all, I am living in Thailand and building CBGs for about a year.  I will be returning to the UK…See More
9 hours ago
Rob (Uker) Porras commented on Randy S. Bretz's photo
Thumbnail

Off the Bench !

"Im assuming the wood is cherry?"
12 hours ago
Rob (Uker) Porras commented on Randy S. Bretz's photo
Thumbnail

Off the Bench !

"Wow wee!!! That is gorgeous!! "
12 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->