#1 resource for Cigar Box Guitars, Free Plans, How-To, Parts & More!

Cigar Box Nation is sponsored by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!

Bottle Neck Slides

Went and bought a glass cutter and planned on using the boiling water / cold water technique to pop the ends off of some beer bottles. First bottle, the cutter seemed to score a line but of course it was crooked so I tried again. This time the cutter would not score the bottle. I turned the blade to another one and still nothing. Is there a secret to using a glass cutter? I tried scoring it with a cutting wheel on my Dremel. This seemed to score it but when I tried the boiling water cold water treatment, no luck.

0 members like this

▶ Reply to This

Replies to This Discussion

Permalink Reply by Bluesheart on May 2, 2012 at 8:48am

A word of caution, wear a dust mask if you are cutting/grinding glass. Inhaling fine glass particles just can't be very good for you.

▶ Reply

Permalink Reply by MichaelS Country Boy Guitars on May 2, 2012 at 11:17am

Good advise, also use it for cutting wood, thats not so great either.

▶ Reply

Permalink Reply by anotola humbuckker on May 2, 2012 at 3:30pm

most of you guys seem to be in awfull hurry to make loads of these slides (i know, they break, but not THAT often right??)

What i do is take a file and file a line all around the (wine)-bottle which i hold in place with some glue clamps, then when te line is deep enough i knock with a wrench or another blunt object laying around on the bottom, and it falls of magically. Takes about 15 minutes.

Oh, and then you got to find some concrete and "rub" the sharp edge off the bottom of your slide.

No power tools needed!

▶ Reply

Permalink Reply by Maddog on May 2, 2012 at 4:27pm

Hey, we got a boat load of friends. They all need slides :-)

▶ Reply

Permalink Reply by FretMonkey on May 2, 2012 at 4:32pm

I've tried a number of times but could never get what I wanted so I ordered a Diamond Bottlenecks custom made for my digit (ring sized) - tapered the way I wanted and the color I wanted. I would cry a river if I lost or broke it - and then I would immediately trick my wife into letting me order another one. I love it.