Hiya folks!

not sure the world is ready for this but I've just finished my first license plate bass/lead hybrid!  I read a tip that works very well - put the pup below the plate cos it's magnetic.

I built my own box to fit the plate.  Learned a lot about basic woodwork in the process!

I'm pleased how it looks, but got to admit the lead strings sound a lot better than the bass ones, so I'm going to restring with all lead strings to make a resonator.  But I'm not going to give up on the bass/lead "baytar" just yet and make a similar design to this but instead cut up an old oak table to make a solid body license plate one.  Can't wait to get started!

Views: 151

Reply to This

Replies to This Discussion

Curious...what is the benefit of a solid body license plate build? I mean, I get the resonator thing for a license plate on a box, but it seems like a plate on a solid body would just be decoration (which is cool if that's what you're going for.) Again, just curious.

Purely decoration!  All my mates have said it looks cool with the Elvis plate so I thought it would be a shame if I didn't have it to use onstage (I'm our bands bassist/singer).

The one thing I was thinking about was whether to again position the pick up below the plate?  I'd still like to try and get a more rattly sound on the bass to add a bit of roughness to our sound.  Plus the plate looks good without another hole in it I think.

Sounds like a good plan. It is a really cool plate. Maybe you could hollow out a little space underneath the plate.

You still get a little plate influence in there.
If you guys get a chance, check out Duesenberg Guitar's Rezobro guitar. It looks like a Les Paul guitar with a round plate on top, but it has a unique bridge/pickup feature to maximize/minimize the resonator influence and sounds awesome. http://duesenbergusa.com/product/pomona-6-lapsteel/

One of the guy's over on the TDPRI guitar forum removed the middle pickup of his Strat type guitar and replaced it with a 2 pole Delta Groove pickup and plays bass while playing guitar at the same time.
www.youtube.com/watch?v=P-5L3iRxyIo
Bass pickup to a on/off toggle switch, then to one of the tone knobs converted to a volume and run to a separate jack to a bass amp.

That is a great sound!  Sorry, but how does he get the bass sound?  Is he using an octaver?

http://www.tdpri.com/threads/presenting-blackie-my-guitar-bass-proj...

Here's the thread for details.

You can run a guitar signal to a bass amp and get convincing bass sound at least using the low strings. His pickup only gets the low E & A strings. A octave pedal would enhance it well.

There's a couple of companies out there making pickups in a humbucker housing that will do this, but they are very pricey. You can make your own fairly cheap.

Oh I get it now.  That is a very clever idea! Thanks for sharing.  I'll include this in a design and report back the results :)

RSS

The Essential Pages

New to Cigar Box Nation?How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

2017 "Kick The Can" Build-Off contest - Canjos, Tin Can Guitars

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Boxy Music 14 minutes ago. 54 Replies

Advice

Started by Sean Albany in Performances, How to Play, Lessons, Concerts. Last reply by Paul Craig 1 hour ago. 7 Replies

Tools Question

Started by Shawn Doyle in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans 20 hours ago. 11 Replies

Custom box

Started by Shawn Doyle in Building Secrets, Tips, Advice, Discussion. Last reply by Clark Rowden 22 hours ago. 4 Replies

Shipping a CBG

Started by Ducati Scotty in Building Secrets, Tips, Advice, Discussion. Last reply by Richard Dean on Sunday. 24 Replies

Latest Activity

Boxy Music replied to Shane Speal shanespeal.com's discussion 2017 "Kick The Can" Build-Off contest - Canjos, Tin Can Guitars
"This is a soprano uke made from a very old baby blue tin which used to have bandages in it.…"
14 minutes ago
Holly Hodson posted photos
24 minutes ago
Poor_Richard replied to Taffy Evans's discussion Making my biscuit tin CBG sound better
"Great job"
43 minutes ago
Poor_Richard liked Taffy Evans's discussion Making my biscuit tin CBG sound better
43 minutes ago
Richard Dean replied to Shane Speal shanespeal.com's discussion 2017 "Kick The Can" Build-Off contest - Canjos, Tin Can Guitars
"I'm sure they will edit it for you, we're not supposed to comment on entries either, but…"
43 minutes ago
Korrigan liked J.Rob's photo
52 minutes ago
Jeffrey Greene replied to Jeffrey Greene's discussion O Holy Night--Can Anyone Help? in the group CBG Tabs
"Thank you so very much for that, sir! It was my father's favorite Christmas song before he…"
53 minutes ago
Korrigan commented on Mike S's photo
Thumbnail

Ashton 2

"Looking good!"
56 minutes ago
Korrigan liked Mike S's photo
57 minutes ago
G.S. Monroe replied to Jeffrey Greene's discussion O Holy Night--Can Anyone Help? in the group CBG Tabs
"I'll see if I can put together a tab sheet for you. Oh Holy Night is one of my favorite…"
1 hour ago
Taffy Evans replied to Taffy Evans's discussion Making my biscuit tin CBG sound better
"Hi, thanks Paul. Pickup placement: I try to put the pickups in the most benifitial area, normally…"
1 hour ago
Andries D. EKER left a comment for Keith Rearick
"Thanks Keith ! appriciated ! Greeeettsszz A.D."
1 hour ago

Music

Loading…

© 2017   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service