Hiya folks!

not sure the world is ready for this but I've just finished my first license plate bass/lead hybrid!  I read a tip that works very well - put the pup below the plate cos it's magnetic.

I built my own box to fit the plate.  Learned a lot about basic woodwork in the process!

I'm pleased how it looks, but got to admit the lead strings sound a lot better than the bass ones, so I'm going to restring with all lead strings to make a resonator.  But I'm not going to give up on the bass/lead "baytar" just yet and make a similar design to this but instead cut up an old oak table to make a solid body license plate one.  Can't wait to get started!

Views: 98

Reply to This

Replies to This Discussion

Curious...what is the benefit of a solid body license plate build? I mean, I get the resonator thing for a license plate on a box, but it seems like a plate on a solid body would just be decoration (which is cool if that's what you're going for.) Again, just curious.

Purely decoration!  All my mates have said it looks cool with the Elvis plate so I thought it would be a shame if I didn't have it to use onstage (I'm our bands bassist/singer).

The one thing I was thinking about was whether to again position the pick up below the plate?  I'd still like to try and get a more rattly sound on the bass to add a bit of roughness to our sound.  Plus the plate looks good without another hole in it I think.

Sounds like a good plan. It is a really cool plate. Maybe you could hollow out a little space underneath the plate.

You still get a little plate influence in there.
If you guys get a chance, check out Duesenberg Guitar's Rezobro guitar. It looks like a Les Paul guitar with a round plate on top, but it has a unique bridge/pickup feature to maximize/minimize the resonator influence and sounds awesome. http://duesenbergusa.com/product/pomona-6-lapsteel/

One of the guy's over on the TDPRI guitar forum removed the middle pickup of his Strat type guitar and replaced it with a 2 pole Delta Groove pickup and plays bass while playing guitar at the same time.
www.youtube.com/watch?v=P-5L3iRxyIo
Bass pickup to a on/off toggle switch, then to one of the tone knobs converted to a volume and run to a separate jack to a bass amp.

That is a great sound!  Sorry, but how does he get the bass sound?  Is he using an octaver?

http://www.tdpri.com/threads/presenting-blackie-my-guitar-bass-proj...

Here's the thread for details.

You can run a guitar signal to a bass amp and get convincing bass sound at least using the low strings. His pickup only gets the low E & A strings. A octave pedal would enhance it well.

There's a couple of companies out there making pickups in a humbucker housing that will do this, but they are very pricey. You can make your own fairly cheap.

RSS

The Essential Pages

New to Cigar Box Nation?How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Folk Outsider, 3-String Stephen LIVE at Gitty's

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by jeff Cadzow yesterday. 2 Replies

Thin a top

Started by Mark Werner in Building Secrets, Tips, Advice, Discussion. Last reply by Paul Craig yesterday. 21 Replies

Threw the PICK away

Started by Jeff 'Bones' Reilly in Performances, How to Play, Lessons, Concerts. Last reply by Dustin Aurand on Monday. 9 Replies

Blade Runner Blues on CBG

Started by Dustin Aurand in Performances, How to Play, Lessons, Concerts. Last reply by Cause the Blue rat on Sunday. 9 Replies

2017 Plumber's Challenge Winners

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Paul Craig on Saturday. 14 Replies

Latest Activity

Keith Rearick liked Mark Tripp's photo
9 minutes ago
Slow Blues Dani & Ol' Grey Bear replied to Slow Blues Dani & Ol' Grey Bear's discussion I cheated and bought a solderless wiring harness. Naughty boy! in the group CBG wiring & electronics.
"Thanks again Paul. I'm hoping for success first time around lol. We shall see though. Got to…"
11 minutes ago
bigmcgiv replied to Paul Craig's discussion What's on your workbench?
"I never came across a dud. but im sure its possible. the box walls are 3/8 and lid and…"
25 minutes ago
Rob Uker liked Jim Morris's video
31 minutes ago
the anonymous pick commented on the anonymous pick's photo
33 minutes ago
Paul commented on Paul's photo
Thumbnail

IMGP2793

"Help your self Bob! which bit is it?"
49 minutes ago
Wal Callabt posted a status
"Really good start there- got my name wrong. The 't' at the end should be a 'y'! Next time- guitars!"
56 minutes ago
Paul Craig replied to Slow Blues Dani & Ol' Grey Bear's discussion I cheated and bought a solderless wiring harness. Naughty boy! in the group CBG wiring & electronics.
"Good luck to you. If you need to change a cap or pots later, it's no big deal. Just more…"
59 minutes ago
Slow Blues Dani & Ol' Grey Bear replied to Slow Blues Dani & Ol' Grey Bear's discussion I cheated and bought a solderless wiring harness. Naughty boy! in the group CBG wiring & electronics.
"LOL no danger of me trying anything so bold! I follow diagrams when I have to wire a plug! ;o)"
1 hour ago
Bob Harrison commented on Paul's photo
Thumbnail

IMGP2793

"That is a really good idea.. I would like to copy you on that and you will be in my memory for a…"
1 hour ago
Slow Blues Dani & Ol' Grey Bear replied to Slow Blues Dani & Ol' Grey Bear's discussion I cheated and bought a solderless wiring harness. Naughty boy! in the group CBG wiring & electronics.
"Then I really hope they sound decent or I'm sticking with one pickup lol. I have wired each…"
1 hour ago
Peter Otto commented on the anonymous pick's photo
Thumbnail

New swamp witch guitars ARCADIA line made with pinball playfeilds 4

"Pinball machines. The memories.... :) Very nice, Pick!"
1 hour ago

Music

Loading…

© 2017   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service