#1 resource for Cigar Box Guitars, Free Plans, How-To, Parts & More!

Acrylic tubing plastic slide

For about 2 weeks now I have been using a home made slide, created from a length of very tough hard acrylic clear plastic tubing about 1 1/4 inch diameter. Initially, before I used it I thought it probably wouldnt hold up well and would get eaten up quickly by the strings. But to my surprise it holds up better than the glass dunlop one I have. It has a far smoother feel, smoother even than the piece of buffalo horn i also use sometimes. It glides with much less string noise and doesnt pinch or bite like the glass one does. After 2 weeks of daily (2 hours +) use there are no scratches on it, just a slight dulled appearance in the centre area that touches the strings. Its working well. I bought an 18 inch piece of the tubing off ebay, so will get probably 3 or 4 slides out of one piece.

Just thought I'd mention it, might interest somebody!

1 member likes this

▶ Reply to This

Replies to This Discussion

Permalink Reply by Clock The Wolf on June 15, 2015 at 1:19pm

Cool!

▶ Reply

Permalink Reply by Bama Hound on June 15, 2015 at 1:30pm

I guarantee it would get more mileage than an any glass one on my tile floor, given as I am afflicted with "fumblitis". That is going to get a try out. P.S. With a 1 1/4" diameter, I hope you are not a proctologist , I use an 11/16" socket. (;-0)

▶ Reply

Permalink Reply by TN Twang on June 16, 2015 at 6:55am

Great idea. Like Bama H, I dropped a bottle neck--only mine was on a concrete stage floor. Beaucoups dangereux! Looks like pricing is decent in modest quantities. I'll give it a try. Many thanks.

▶ Reply

Permalink Reply by Brown Water Jerry (Rice) on June 26, 2015 at 5:06pm

I made a couple outta pvc pipe were OK kinda mellow,not as noisy as metal ones.

▶ Reply

Permalink Reply by Randy S. Bretz on June 27, 2015 at 12:08am

Only problem I see is there`s probably not much sustain using plastic. My custom bone/ wood slides have loads of sustain, I make them that the surface is as smooth as glass. Plus they won`t break when dropped on concrete...lol.

▶ Reply

Permalink Reply by Goldsmithexile on June 27, 2015 at 9:07am

I have some teak which I may use to make a slide or a tone bar. What woods are good for that? In europe hornbeam is pretty tough, dense and oily, might be worth a try. Lignum vitae? Ebony?

▶ Reply

Permalink Reply by John Sawyer on June 27, 2015 at 11:26am

Checked your online store... How does one place an order?

▶ Reply

Permalink Reply by Skeesix on June 27, 2015 at 7:50am

I've tried plastic for slides before, just picking up random items around the house and trying to play slide with them. My impression was that plastic was a tone sucker, just like I would rather use a wood, metal or even cardboard resonator for a box instead of plastic. However, there are many types of plastic, so your mileage may vary.

▶ Reply

Permalink Reply by Goldsmithexile on June 27, 2015 at 9:03am

The stuff I used is VERY tough, nowhere near as soft as pvc plumbers pipes would be. I was amazed how well it glided down onto the strings, much less grabby than the dunlop glass, a nice smooth feel. And the sustain isnt too bad . Interestingly it cut neat with a hack saw, it didnt crack or splinter as some sheet plastics such as genotherm can do

Since the original post I have used only that slide and it is now showing one or 2 scratches, but on occasion I was really welting that thing (LOL on drums I am definately a light hitter, only 7a sticks, never cracked a cymbal in 30 + years of playing) But on the diddley bow I seem to be the exact opposite. I like to bounce into notes and do flam hammerons and stuff, very percussive sometimes. My glass slide has grooves, now the acrylic one has a few as well, but hey, about 1/10th the price of a dunlop glass (kinda nervous to keep it in my pocket...)

Listen to it here, same slide used on 2 string bass diddley and 2 string lead diddley

https://youtu.be/Gx_jGLM6ClQ