3 string blank tab sheets

Replies to This Discussion

Permalink Reply by Keni Lee Burgess on April 7, 2012 at 4:49pm

I use this software http://www.tabledit.com/

 

• ▶ Reply

Permalink Reply by Marcus P. Clarke on April 7, 2012 at 6:00pm

Keni,

I'm not a very technical person,not real sure what this software is about. I play mostly what feels good but would like to take a few steps forward. I have looked at your teaching video's and felt it was a little advanced for me. Perhaps just a step at a time...Marcus

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on April 9, 2012 at 2:45am

Keni,

 

I had not seen this software before. Thanks very much for the link; gotta add it to the Guitarsenal!

• ▶ Reply

Permalink Reply by The Phrygian Kid on April 7, 2012 at 5:59pm

Well I'd use a ruler and a pen. ;)

• ▶ Reply

Permalink Reply by Marcus P. Clarke on April 7, 2012 at 6:04pm

I was hoping someone already used a ruler and a pen. Generally stick to the 12 bar and 16 bar blues. Sing along after a bit of Makers Mark...Marcus

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on April 8, 2012 at 5:18am

Marcus,

 

This took me about 3 minutes in Powerpoint; you should be able to right-click on this image, copy it, directly print it out, paste it in Word or another document program, save it, and re-print it out in Landscape mode on a standard sheet of paper to your heart's content; make as many copies as you like:

 

• ▶ Reply

Permalink Reply by Marcus P. Clarke on April 8, 2012 at 9:27am

Strat, This is exactly what I was looking for thanks so much...Marcus

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on April 9, 2012 at 2:47am

My pleasure. Post some of your 3-string tabs in the 3-string chords and tabs Discussion Group when you get a chance. Other people will undoubtedly benefit.

• ▶ Reply